TIMER AS-OFF DELAY 0991452 - Caterpillar

Engine:
3606 (S/N: 8RB)
3608 (S/N: 6MC)
3612 (S/N: 9RC; 9FR; 2NZ)
3616 (S/N: 1PD; 1FN)
3618 (S/N: 2MW)
The speed switch in the Marine Monitoring System II (MMS II) and the Generator Monitoring System (GMS) requires a speed pickup that has a power supply. This requirement is met with the 208-5469 Speed Sensor .The 208-5469 Speed Sensor is nonserviceable as a group. The individual parts within the group must be ordered separately. The connector plug must be installed onto the speed sensor cable. Table 1 lists the parts that are required.
Table 1
Quantity     Part Number     Description     Comments    
1     194-6734     Speed Sensor     Cut the sensor lead to length before installing the connector.    
1     155-2260 (1)     Plug Assembly     Sensor Connector    
3     9X-3402 (1)     Connector Socket     Sockets for Sensor Connector    
( 1 ) This part is in the 175-3700 Connector Repair Kit .See Special Instructions, SEHS9615, "Servicing Deutsch HD and DT Style Connectors" for complete information on the 175-3700 Connector Repair Kit.
Illustration 1 g00832979
This illustrates a speed sensor cable. The connector kit (1) is installed on the cable end. (1) 155-2260 Connecting Plug Kit (2) speed sensor cable (cut to desired length) (3) 194-6734 Speed Sensor In early production engines, a Sure-Seal 4-pin connector was used on the cable end and on the sensor end. Current production engines use a Deutsch DT Style Connector. The DT Connector can be installed on the early production engines in order to allow the speed sensor to function. The cable end of the speed switch can be changed to the Deutsch DT Style Connector by using the parts in Table 2.
Table 2
Quantity     Part Number     Description     Comments    
1     102-8803 (1)     Receptacle Kit     Mating Connector    
3     9X-3401 (1)     Connector Pin     Pins for Mating Connector    
( 1 ) This part is in the 175-3700 Connector Repair Kit .
Illustration 2 g00832990
This is an Illustration of the Mating Connector 102-8803 Receptacle Kit and 9X-3401 Connector Pins .The DT Connector that can be installed on the Speed Controller cable end is shown in Illustration 2.The wiring schematic for the speed sensor is shown in Illustration 3.
Illustration 3 g00832948
This Illustration shows the wiring schematic for the 155-2260 Connecting Plug Kit and 9X-3402 Connector Sockets .