AVSPARE.COM
parts catalog

TIMER AS 5304345 - Caterpillar


5304345 TIMER AS Caterpillar parts
Rating:
26
Alternative (cross code) number:
CA5304345
530-4345
5304345
Caterpillar 5304345 TIMER AS
Weight: 6 pounds 2 kg.

Buy TIMER AS 5304345 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


Illustration 1 g02358668
Remove bolts (1) and the washers. Move the hose assembly and the wire assemblies for the exhaust monitor out of the way.
Illustration 2 g02358669
Open the left side access door (2) on top of the machine.
Illustration 3 g02358671
Release the latches and remove cover (3) .
Illustration 4 g02358672
Remove primary element (4) .
Illustration 5 g02358673
Remove secondary element (5) .
Disconnect harness assembly (7) and remove indicator assembly (6) .
Illustration 6 g02358674
Loosen the clamp and remove tube (8) .
Illustration 7 g02358675
Use two people to remove air cleaner assembly (9). The weight of air cleaner assembly (9) is approximately 23 kg (51 lb). Remove bolts (10) and air cleaner assembly (9) .Installation Procedure
Illustration 8 g02358675
Use two people to install air cleaner assembly (9). The weight of air cleaner assembly (9) is approximately 23 kg (51 lb). Install air cleaner assembly (9) and bolts (10). Tighten bolts (10) to a torque of 10 2 N m (89 20 lb in).
Illustration 9 g02358674
Install tube (8) and tighten the clamp to a torque of 5 1 N m (44 9 lb in).
Illustration 10 g02358673
Install indicator assembly (6). Tighten indicator assembly (6) to a torque of 2 0.5 N m (18 4.0 lb in). Connect harness assembly (7) to indicator assembly (6) .
Install secondary element (5) .
Illustration 11 g02358672
Install primary element (4) .
Illustration 12 g02358671
Install cover (3) and engage the latches.
Illustration 13 g02358669
Close the left side access door (2) on top of the machine.
Illustration 14 g02358668
Place the hose assembly and the wire assemblies for the exhaust monitor into position. Install the washers and bolts (1). Tighten the bolts to a torque of 10 2 N m (89 20 lb in).Note: The wires with excess length should be coiled. The antenna wires must have a bend radius of 51 mm (2 inch).Note: Do not violate the bend radius.Note: Do not kink the antenna leads.
Turn the battery disconnect switch to the ON position and close the left side access door.


Parts timer Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.