TIMING PLATE 1P7410 - Caterpillar

Removal Procedure
Start By:
Release the hydraulic system pressure. Refer to Disassembly and Assembly, "Hydraulic System Pressure - Release". Note: Put identification marks on all lines, on all hoses, on all wires, and on all tubes for installation purposes. Plug all lines, hoses, and tubes. This helps to prevent fluid loss and this helps to keep contaminants from entering the system.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01317755
Remove screw (1).
Illustration 2 g01317756
Remove armrest (2).
Illustration 3 g01317758
Disconnect harness assemblies (4) and remove cover assembly (3).
Illustration 4 g01317765
Reposition boot (5).
Illustration 5 g01317821
Remove bolts (7) and reposition joystick control (6).
Illustration 6 g01317822
Disconnect harness assemblies (8). Disconnect hose assemblies (9). Remove joystick control (6).