1176809 TIP-PENETRATION Caterpillar parts
375 L, 385B, 390D, 994, 994D, 994F
Rating:
Alternative (cross code) number:
CA1176809
117-6809
1176809
CA1176809
117-6809
1176809
Weight: 109 pounds 49 kg.
EXCAVATOR, WHEEL LOADER,
Compatible equipment models: 1176809:
Number on catalog scheme:
7
For full view, you need register
Information:
Removal Procedure
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Drain the cooling system. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change".
Illustration 1 g01066248
Disconnect hose assembly (5) .
Remove bolts (6) .
Remove bonnet (7) and the integral seal from the water pump. Remove the O-ring seal from the bonnet.
Remove bolts (8) .
Rotate engine oil cooler (4) and slide the engine oil cooler toward the front of the engine in order to remove the engine oil cooler from cooler bonnet (1) and the oil filter base.
Remove the O-ring seal from cooler bonnet (1). Remove O-ring seals (9) from oil filter base (10) .
Remove bolts (3) .
Remove bolts (2) and remove cooler bonnet (1) from the cylinder block and the transmission oil cooler. Remove the gaskets from the cooler bonnet.
If necessary, clean the tubes of the engine oil cooler with a 3.81 mm (0.150 inch) diameter rod that is approximately 457 mm (18 inch) long.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Drain the cooling system. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change".
Illustration 1 g01066248
Disconnect hose assembly (5) .
Remove bolts (6) .
Remove bonnet (7) and the integral seal from the water pump. Remove the O-ring seal from the bonnet.
Remove bolts (8) .
Rotate engine oil cooler (4) and slide the engine oil cooler toward the front of the engine in order to remove the engine oil cooler from cooler bonnet (1) and the oil filter base.
Remove the O-ring seal from cooler bonnet (1). Remove O-ring seals (9) from oil filter base (10) .
Remove bolts (3) .
Remove bolts (2) and remove cooler bonnet (1) from the cylinder block and the transmission oil cooler. Remove the gaskets from the cooler bonnet.
If necessary, clean the tubes of the engine oil cooler with a 3.81 mm (0.150 inch) diameter rod that is approximately 457 mm (18 inch) long.
Caterpillar SIS machinery equipment:
Caterpillar SIS
994 Wheel Loader 9YF00001-UP (MACHINE) POWERED BY 3516 Engine »
117-6809
TIP-PENETRATION
375 & 375 L Excavators 1JM00001-UP (MACHINE) POWERED BY 3406 Engine »
117-6809
TIP-PENETRATION
994D WHEEL LOADER 3TZ00001-UP (MACHINE) POWERED BY 3516B Engine »
117-6809
TIP-PENETRATION
994F Wheel Loader 44200001-UP (MACHINE) POWERED BY 3516 Engine »
117-6809
TIP-PENETRATION
Caterpillar parts catalog:
Parts tip Caterpillar catalog:
245B, 330, 330 L, 330B L, 345B II, 345B L, 345C, 345D, 345D L, 349D, 349D L, 350, 365B, 365B L, 375, 375 L, 385B, 988F II, 988G, 988H, 990 II, 992C, 992D, 992G
235, 235C, 235D, 245, 245D, 330, 330 L, 330B L, 330C L, 345B II, 345B L, 345C, 345C L, 345D, 345D L, 349D, 349D L, 349E, 350, 365B, 365B II, 365B L, 365C, 365C L, 375, 375 L, 385B, 5110B, 5130, 5130B,...
235, 235C, 235D, 245, 245D, 328D LCR, 330, 330 L, 330B L, 330C L, 345B II, 345B L, 345C, 345C L, 345D, 345D L, 349D, 349D L, 350, 365B, 365B II, 365B L, 365C, 365C L, 375, 375 L, 385B, 988F, 988F II, ...
235, 245, 245D, 330, 330 L, 345B II, 345B L, 345C, 345D, 345D L, 349D, 349D L, 350, 365B, 365B L, 375, 375 L, 385B
235C, 322B L, 322C, 325B L, 325C, 330, 330B, 330B L, 330C L, 345B II, 345B L, 345C, 345D, 345D L, 349D, 349D L, 350, 385B
345C L, 350, 365B, 365B II, 365C, 365C L, 374D L, 375, 375 L, 385C, 385C L, 5080, 980G, 988H, 988K, 992G
375 L, 385B, 385C, 385C FS, 385C L, 5080, 992C, 992G, 994, 994D, 994F
994, 994D, 994F
345C, 345C L, 365B, 365B II, 365B L, 365C, 365C L, 374D L, 375, 375 L, 385B, 385C, 385C L, 390D, 5080, 5110B, 992G
345B II, 345C L, 350, 365B, 365B II, 365C, 365C L, 374D L, 375, 375 L, 385B, 385C, 385C L, 5080, 992G
345C L, 365B, 365B II, 365C, 365C L, 374D L, 375, 375 L, 385B, 385C, 385C L, 5080, 5110B, 992G
374D L, 374F L, 385C, 385C FS, 385C L, 390D, 390D L, 992K, 994F
2296977
TIP GP-TWIN SHARP
320C, 320D, 320D L, 322C, 324D L, 324E L, 324E LN, 325C, 325D L, 329D L, 329E L, 329E LN, 330C L, 330D L, 336D L, 982M
320C, 320D, 320D L, 322C, 324D L, 324E L, 324E LN, 325C, 325D L, 329D L, 329E L, 329E LN, 330C L, 330D L, 336D L, 982M
2296964
TIP GP-EXTRA-DUTY
315C, 315D L, 318C, 319C, 319D, 319D LN, 320C, 320D, 320D LN, 320E LN, 320E LRR, 321D LCR, 322C, 323D L, 323D LN, 323D SA, 323E L, 324D L, 325C, 330C, 345C, 950G II, 950H, 950K, 962G II, 962H, 962K, 9...
315C, 315D L, 318C, 319C, 319D, 319D LN, 320C, 320D, 320D LN, 320E LN, 320E LRR, 321D LCR, 322C, 323D L, 323D LN, 323D SA, 323E L, 324D L, 325C, 330C, 345C, 950G II, 950H, 950K, 962G II, 962H, 962K, 9...
213B, 214B, 224B, 225, 225D, 227, 229, 229D, 231D, 245D, 318B, 318C, 320, 320 L, 320B, 320B FM LL, 320B L, 320B U, 320C, 320D, 320D L, 320D LRR, 320D RR, 320D2, 320E, 320E RR, 320N, 321B, 321D LCR, 32...
2320082
TIP-LEVELING EDGE
315C, 315D L, 318C, 319C, 320C, 323D L, 950G II, 950H, 962G II, 962H, M315C, M315D, M316C, M316D, M318C, M318D, M318D MH, M322C, M322D, M322D MH
315C, 315D L, 318C, 319C, 320C, 323D L, 950G II, 950H, 962G II, 962H, M315C, M315D, M316C, M316D, M318C, M318D, M318D MH, M322C, M322D, M322D MH
2297081
TIP-PENETRATION
315C, 318C, 320C
315C, 318C, 320C
2297165
TIP GP-DOUBLE SPIKE
349E L, 349E L VG, 365B, 374D L, 385B, 390D, 390D L, 992K
349E L, 349E L VG, 365B, 374D L, 385B, 390D, 390D L, 992K
8E0838
TIP GP-PENETRATION
231D, 245D, 320, 320 L, 320B, 320B FM LL, 320C, 320N, 322, 322 FM L, 322 LN, 322B, 322B L, 322B LN, 322C, 324D, 325, 325 L, 325 LN, 325B, 325B L, 325C, 330, 330 FM L, 330 L, 330B, 330B L, 330C, 330C L...
231D, 245D, 320, 320 L, 320B, 320B FM LL, 320C, 320N, 322, 322 FM L, 322 LN, 322B, 322B L, 322B LN, 322C, 324D, 325, 325 L, 325 LN, 325B, 325B L, 325C, 330, 330 FM L, 330 L, 330B, 330B L, 330C, 330C L...
2296973
TIP GP-EXTRA-DUTY
320C, 320D, 320D L, 322C, 323D L, 323D LN, 323D SA, 324D, 324D L, 324D LN, 324E L, 324E LN, 325C, 325D, 325D L, 329D, 329D L, 329D LN, 329E L, 329E LN, 330C, 330C L, 330D L, 330D LN, 336D, 336D L, 336...
320C, 320D, 320D L, 322C, 323D L, 323D LN, 323D SA, 324D, 324D L, 324D LN, 324E L, 324E LN, 325C, 325D, 325D L, 329D, 329D L, 329D LN, 329E L, 329E LN, 330C, 330C L, 330D L, 330D LN, 336D, 336D L, 336...
446, 446B, 931C, 935C, E70B
6I6417
TIP GP-LONG
345B II, 345C L, 350, 365B, 365B II, 365C, 365C L, 374D L, 375, 375 L, 385B, 385C, 385C L, 5080, 992G
345B II, 345C L, 350, 365B, 365B II, 365C, 365C L, 374D L, 375, 375 L, 385B, 385C, 385C L, 5080, 992G
2296976
TIP GP-SHARP
320C, 320D, 320D L, 322C, 323D L, 323D2 L, 324D L, 324E L, 324E LN, 325C, 325D L, 329D L, 329E L, 329E LN, 330C L, 330D L, 336D L, 982M
320C, 320D, 320D L, 322C, 323D L, 323D2 L, 324D L, 324E L, 324E LN, 325C, 325D L, 329D L, 329E L, 329E LN, 330C L, 330D L, 336D L, 982M
1017269
TIP GP-LONG
385B, 390D, 994, 994D, 994F
385B, 390D, 994, 994D, 994F