TIP GP-PENETRATION PLUS 1959181 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     5P-0144     Fuel Line Socket     1    
B     9S-9082     Engine Turning Tool     1    
C     FT-1322     Lever Assembly     1    Start By:
Remove the valve covers. Refer to Disassembly and Assembly, "Valve Mechanism Cover - Remove and Install".
Illustration 1 g00787792
Use Tool (A) and disconnect adapters (4) and (5) on each fuel line.
Remove nuts (2) and locknuts (3) on each fuel line.
Remove the fuel lines (1) .
Illustration 2 g00787814
Use Tool (B) and rotate the crankshaft in order to release the pressure against the rocker arms. Use Tool (C) and move the rocker arms far enough so the push rods can be removed.
Illustration 3 g00787833
The valve bridges (9) must be installed in the same locations. Mark each valve bridge in order to identify the location of the valve bridge. Remove the valve bridges.
Remove bolts (7) and rocker shaft assembly (8) .