TIP-CHISEL 2085232 - Caterpillar

Illustration 1 g03132776
Table 1
Specification for 350-8694 Electric Starting Motor Gp
Item Qty Part Specification Description
When the electric starting motor is viewed from the pinion end, the motor rotates in clockwise direction.
1 1 338-3453 Starting Motor Solenoid Current consumption at 20V and 25 °C (77 °F):
Pull-in winding is 49.3 3.3 amp.
Maximum hold-in winding is 6.8 amp.
2 2 6V-8188 Nut Torque the ground terminal nut to 30.5 3.5 N m (270.0 31.0 lb in).
B - - Clearance between the pinion and the housing is 9.1 mm (0.36 inch).
Illustration 2 g03132856
View A-A
Table 2
Item Qty Part Specification Description
3 1 - The switch terminal must be insulated with heat shrink tubing. Do not use molded terminals.
Torque to 3.4 1.2 N m (30.1 10.6 lb in).
4 1 - Torque the ground terminal nut to 3.4 1.2 N m (30.1 10.6 lb in).
5 1 6V-8188 Nut A maximum of three cable terminals or wire terminals may be used between the battery terminal nut (4). A maximum of two of the cable terminals may be equal to or greater than 0 AWG.
Torque the battery terminal nut to 30.5 3.5 N m (270.0 31.0 lb in).
6 1 6V-8188 Nut Torque the motor terminal nut to 30.5 3.5 N m (270.0 31.0 lb in).
7 1 - Torque the motor frame terminal nut to 30.5 3.5 N m (270.0 31.0 lb in).
- - - No load conditions at 25 °C (77 °F):
Speed is 6950 1650 rpm.
Current draw is 115 25 amp.
Voltage is 23 VDC.