2209102 TIP-PENETRATION Caterpillar parts
320C, 320D, 320D L, 322C, 323D L, 323D LN, 323D SA, 323D2 L, 324D, 324D L, 324D LN, 324E L, 324E LN, 325C, 325D, 325D L, 329D L, 329D LN, 329E L, 329E LN, 330C, 330C L, 330D L, 330D LN, 336D L, 336D L...
Rating:
Alternative (cross code) number:
CA2209102
220-9102
2209102
CA2209102
220-9102
2209102
Weight: 18 pounds 8 kg.
EXCAVATOR, WHEEL LOADER,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Cat Style K100 Series Excavator/Loader Bucket Tooth - 475-5493, 220-9102 Penetration (with Pin)
Generic
Generic
$117.39
15 Apr 2024
18.75[8.44] Pounds
US: Digger Supply
Cat Style K100 Series Excavator/Loader Bucket Tooth - 475-5493, 220-9102 Penetration (Tooth Only)
Generic
Generic
$114.95
07 Sep 2023
18.75[8.44] Pounds
US: Digger Supply
Cat Style K100 Series Excavator/Loader Bucket Tooth - 475-5493, 220-9102 Penetration (Tooth Only)
Generic
Generic
Number on catalog scheme:
2
For full view, you need register
Compatible equipment models: 2209102:
Information:
Calibration Errors
Table 1
Calibration Error Identifier
Error ID Description Information
1 Calibration Fault, Restart Internal failure.
Calibrate the valve. Refer to Testing and Adjusting, "Valve - Calibrate" for additional information.
2 Active diagnostic present A system fault is active which is preventing the calibration from executing. This needs to be diagnosed by a technician.
103 Set Limits Fault The blade has moved out of the calibration limits during calibration.
Calibrate the valve. Refer to Testing and Adjusting, "Valve - Calibrate" for additional information.
1018 Park Brake Not Engaged Engage the parking brake.
1042 Implement Lockout Switch On Turn off the implement lockout switch.
1048 Hydraulic Oil Temperature Too Low Warm hydraulic system on the machine.
1053 Wrong Blade Motion Confirm that the hoses for the hydraulic cylinders are plumbed correctly.
Calibrate the valve. Refer to Testing and Adjusting, "Valve - Calibrate" for additional information.
105F Calibration Timed Out A step in the valve calibration is stuck because the cylinder is at end of travel, or because of a faulty cable.
The system requested blade movement but it took too long.
Calibrate the valve. Refer to Testing and Adjusting, "Valve - Calibrate" for additional information.
1060 Controls Not Released Release both joysticks and joystick inputs/switches.
1074 Engine Speed Too Low Set engine speed to high idle.
10C8 Operator Not Present Make sure door is closed (if equipped), seat belt is on, operator is seated and arm rests are down.
114C Not Enough Data Points The blade is moving too fast for the system to collect enough data points.
Verify that the laser transmitter is stable and operational.
Calibrate the valve. Refer to Testing and Adjusting, "Valve - Calibrate" for additional information.
114D Set Limits Fault, Restart The calibration limits were incorrectly set.
Calibrate the valve. Refer to Testing and Adjusting, "Valve - Calibrate" for additional information.
114F Elevation Data Not Available The system is not receiving laser sensor data.
Verify that the laser transmitter is operating.
Verify that the receivers are in the laser beam.
Verify that the laser beam is not being blocked.
Check all of the cables.
Calibrate the valve. Refer to Testing and Adjusting, "Valve - Calibrate" for additional information. System Errors
Table 2
System Error Identifiers
Error ID Description Information
13 Valve Calibration Required Calibrate the valve. Refer to Testing and Adjusting, "Valve - Calibrate" for additional information.
23 Invalid Laser Receiver Function Instance System detected a right laser receiver when a left was expected. Check the harness.
25 Elevation Limit Reached Reached the upper limit or the lower limit of the elevation sensor.
40 Poor Elevation Data The laser receiver is providing unreliable elevation data. Check the laser quality, ensure that the laser is stable and that the laser
Table 1
Calibration Error Identifier
Error ID Description Information
1 Calibration Fault, Restart Internal failure.
Calibrate the valve. Refer to Testing and Adjusting, "Valve - Calibrate" for additional information.
2 Active diagnostic present A system fault is active which is preventing the calibration from executing. This needs to be diagnosed by a technician.
103 Set Limits Fault The blade has moved out of the calibration limits during calibration.
Calibrate the valve. Refer to Testing and Adjusting, "Valve - Calibrate" for additional information.
1018 Park Brake Not Engaged Engage the parking brake.
1042 Implement Lockout Switch On Turn off the implement lockout switch.
1048 Hydraulic Oil Temperature Too Low Warm hydraulic system on the machine.
1053 Wrong Blade Motion Confirm that the hoses for the hydraulic cylinders are plumbed correctly.
Calibrate the valve. Refer to Testing and Adjusting, "Valve - Calibrate" for additional information.
105F Calibration Timed Out A step in the valve calibration is stuck because the cylinder is at end of travel, or because of a faulty cable.
The system requested blade movement but it took too long.
Calibrate the valve. Refer to Testing and Adjusting, "Valve - Calibrate" for additional information.
1060 Controls Not Released Release both joysticks and joystick inputs/switches.
1074 Engine Speed Too Low Set engine speed to high idle.
10C8 Operator Not Present Make sure door is closed (if equipped), seat belt is on, operator is seated and arm rests are down.
114C Not Enough Data Points The blade is moving too fast for the system to collect enough data points.
Verify that the laser transmitter is stable and operational.
Calibrate the valve. Refer to Testing and Adjusting, "Valve - Calibrate" for additional information.
114D Set Limits Fault, Restart The calibration limits were incorrectly set.
Calibrate the valve. Refer to Testing and Adjusting, "Valve - Calibrate" for additional information.
114F Elevation Data Not Available The system is not receiving laser sensor data.
Verify that the laser transmitter is operating.
Verify that the receivers are in the laser beam.
Verify that the laser beam is not being blocked.
Check all of the cables.
Calibrate the valve. Refer to Testing and Adjusting, "Valve - Calibrate" for additional information. System Errors
Table 2
System Error Identifiers
Error ID Description Information
13 Valve Calibration Required Calibrate the valve. Refer to Testing and Adjusting, "Valve - Calibrate" for additional information.
23 Invalid Laser Receiver Function Instance System detected a right laser receiver when a left was expected. Check the harness.
25 Elevation Limit Reached Reached the upper limit or the lower limit of the elevation sensor.
40 Poor Elevation Data The laser receiver is providing unreliable elevation data. Check the laser quality, ensure that the laser is stable and that the laser
Caterpillar parts catalog:
Parts tip Caterpillar catalog:
231D, 320, 320B, 320C, 322, 322B L, 322B LN, 322C, 325, 325B, 325B L, 325C, 330, 330 L, 330B L, 330C L, 345B II, 980G, 980G II, 980H, 980K
231D, 320C, 322, 322B L, 322C, 325, 325B, 325B L, 325C, 330, 330B L, 330C L
231D, 245D, 320, 320 L, 320B, 320C, 320D, 322B L, 322B LN, 322C, 324D, 325, 325 L, 325 LN, 325B, 325B L, 325C, 325D, 329D, 330, 330 L, 330B L, 330C, 330C L, 345B II, 980G, 980G II, 980H, 980K
231D, 320C, 322, 322B L, 322C, 325B, 325B L, 325C, 330, 330B L, 330C L, 345B II
980G II, 980H, 980K, 988F, 988F II, 988G, 988H, 990, 990 II, 990H
320B, 320C, 320D, 320D LRR, 320D RR, 321D LCR, 322, 322B L, 322C, 323D L, 325, 325 L, 325B, 325B L, 325C, 330, 330C L, 950G, 950G II, 962G, 962G II, 966G, 966G II, 972G, 972G II, 980C, 980F
2862117
TIP-GENERAL PURPOSE
324D, 324D L, 324D LN, 325D, 325D L, 329D L, 329D LN, 330D L, 330D LN, 336D L, 336D LN, 336E LH, 345C, 345C L, 345D L, 345D L VG, 349D L, 349E L, 349E L VG, 980H, 980K, 982M, 988K
324D, 324D L, 324D LN, 325D, 325D L, 329D L, 329D LN, 330D L, 330D LN, 336D L, 336D LN, 336E LH, 345C, 345C L, 345D L, 345D L VG, 349D L, 349E L, 349E L VG, 980H, 980K, 982M, 988K
320C, 320D, 320D GC, 320D L, 320D2, 322C, 323D L, 323D2 L, 324D, 324D L, 325B L, 325C, 326D L, 329D, 329D L, 330C L
320C, 320C FM, 325B L, 325C, 330C L, 345B II
322C, 325C
322C, 330C L, 345B II, 350
323D L, 323D2 L, 324D, 325C, 325D, 326D L, 329D, 329D L, 330C, 330C L, 330D, 336D, 336D2, 340D L, 340D2 L, 345B II
320C, 320D, 320D L, 322C, 323D L, 323D LN, 323D SA, 324D, 324D L, 324D LN, 324E L, 324E LN, 325C, 325D, 325D L, 329D, 329D L, 329D LN, 329E L, 329E LN, 330C, 330C L, 330D L, 330D LN, 336D, 336D L, 336...
324D L, 325D L, 345C, 950G II, 950H, 962G II, 962H, 966G II, 966H, 966K, 966M, 966M XE, 972G II, 972H, 972K, 972M, 972M XE
2238102
TIP-ABRASION
324D L, 325D L, 330C L, 330D L, 345C, 966G II, 966H, 972G II, 972H, 980H, 980K, 980M, 982M
324D L, 325D L, 330C L, 330D L, 345C, 966G II, 966H, 972G II, 972H, 980H, 980K, 980M, 982M
2238112
TIP-ABRASION
322C, 324D, 324D L, 324D LN, 325C, 325D, 325D L, 330C, 330C L, 330D L, 330D LN, 345C, 345C L, 980H, 980K, 988G, 988H
322C, 324D, 324D L, 324D LN, 325C, 325D, 325D L, 330C, 330C L, 330D L, 330D LN, 345C, 345C L, 980H, 980K, 988G, 988H
330D L, 336D L, 336D2 L, 345C, 345C L, 345D L, 345D L VG, 349D L, 349E L, 349E L VG, 365C, 365C L, 988H, 988K, 990 II, 990H, 990K
349E L, 349E L VG, 365C, 365C L, 374D L, 385C, 385C FS, 385C L, 390D, 390D L, 990 II, 990H, 992G, 992K
2238132
TIP-ABRASION
330D L, 345C, 345C L, 345D L, 345D L VG, 349E L, 349E L VG, 365C, 365C L, 980K, 980M, 982M, 988H, 988K, 990H, 990K
330D L, 345C, 345C L, 345D L, 345D L VG, 349E L, 349E L VG, 365C, 365C L, 980K, 980M, 982M, 988H, 988K, 990H, 990K
1853367
TIP-WEAR
950H, 962H, 966H, 972H
950H, 962H, 966H, 972H
1853561
TIP AS
950H, 962H, 966H, 972H
950H, 962H, 966H, 972H
324D L, 950G II, 950H, 962H
2221091
TIP-HEAVY PENETRATION
324D L, 325D L, 950G II, 950H, 962H
324D L, 325D L, 950G II, 950H, 962H
2221082
TIP-ABRASION
324D L, 950G II
324D L, 950G II