2297081 TIP-PENETRATION Caterpillar parts
315C, 318C, 320C
Rating:
Alternative (cross code) number:
CA2297081
229-7081
2297081
CA2297081
229-7081
2297081
Weight: 8 pounds 4 kg.
EXCAVATOR,
Number on catalog scheme:
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 5S-1330 Valve Spring Compressor 1 Start By:
Remove the cylinder head assembly. Refer to Disassembly and Assembly, "Cylinder Head - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00991548
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Use Tooling (A) to compress valve spring (4). Remove retainer lock (6).
Remove Tooling (A). Remove spring retainer (5), valve spring (4), and washer (3).
Remove valve seal (1) and valve (2).
Repeat Steps 1 through 3 in order to remove the remaining inlet valves and exhaust valves. Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 5S-1330 Valve Spring Compressor 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g00991548
The valve spring keepers can be thrown from the valve when the valve spring compressor is released. Ensure that the valve spring keepers are properly installed on the valve stem. To help prevent personal injury, keep away from the front of the valve spring keepers and valve springs during the installation of the valves.
Lubricate valve (2) with clean engine oil. Install valve (2) in the cylinder head assembly. Install new valve seal (1) onto the valve guide.
Place the following items on the valve stem: washer (3), valve spring (4) and spring retainer (5). Note: A small amount of grease can be used to hold the retainer locks in position during installation.
Use Tooling (A) to compress valve spring (4). Install retainer lock (6).
Repeat Steps 1 through 3 in order to install the remaining inlet valves and exhaust valves. End By:
Install the cylinder head assembly. Refer to Disassembly and Assembly, "Cylinder Head - Install".
Table 1
Required Tools
Tool Part Number Part Description Qty
A 5S-1330 Valve Spring Compressor 1 Start By:
Remove the cylinder head assembly. Refer to Disassembly and Assembly, "Cylinder Head - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00991548
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Use Tooling (A) to compress valve spring (4). Remove retainer lock (6).
Remove Tooling (A). Remove spring retainer (5), valve spring (4), and washer (3).
Remove valve seal (1) and valve (2).
Repeat Steps 1 through 3 in order to remove the remaining inlet valves and exhaust valves. Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 5S-1330 Valve Spring Compressor 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g00991548
The valve spring keepers can be thrown from the valve when the valve spring compressor is released. Ensure that the valve spring keepers are properly installed on the valve stem. To help prevent personal injury, keep away from the front of the valve spring keepers and valve springs during the installation of the valves.
Lubricate valve (2) with clean engine oil. Install valve (2) in the cylinder head assembly. Install new valve seal (1) onto the valve guide.
Place the following items on the valve stem: washer (3), valve spring (4) and spring retainer (5). Note: A small amount of grease can be used to hold the retainer locks in position during installation.
Use Tooling (A) to compress valve spring (4). Install retainer lock (6).
Repeat Steps 1 through 3 in order to install the remaining inlet valves and exhaust valves. End By:
Install the cylinder head assembly. Refer to Disassembly and Assembly, "Cylinder Head - Install".
Caterpillar SIS machinery equipment:
Parts tip Caterpillar catalog:
2297165
TIP GP-DOUBLE SPIKE
349E L, 349E L VG, 365B, 374D L, 385B, 390D, 390D L, 992K
349E L, 349E L VG, 365B, 374D L, 385B, 390D, 390D L, 992K
8E3750
TIP GP-LONG
307C, 308C, 311, 311B, 311C, 312, 312B, 312C, 312C L, 312D, 314C, 345D L, 613C, 613C II, 938G II, 938H, IT38G II, M312, M313C, M313D, M315
307C, 308C, 311, 311B, 311C, 312, 312B, 312C, 312C L, 312D, 314C, 345D L, 613C, 613C II, 938G II, 938H, IT38G II, M312, M313C, M313D, M315
2571749
TIP GP-PENETRATION
953C, 953D
953C, 953D
1701872
TIP GP-PENETRATION
365B, 990, 990 II, 992G
365B, 990, 990 II, 992G
9W8146
TIP
950B
950B
9N4562
TIP GP-LONG
229, 235C, 235D, 245D, 320 L, 322 LN, 322B L, 322B LN, 322C, 325, 325 L, 325 LN, 325B L, 325C, 330, 330 FM L, 330 L, 330B, 330B L, 330C, 330C L, 330D L, 336D, 336E, 336E H, 345B, 345B II, 345B L, 345C...
229, 235C, 235D, 245D, 320 L, 322 LN, 322B L, 322B LN, 322C, 325, 325 L, 325 LN, 325B L, 325C, 330, 330 FM L, 330 L, 330B, 330B L, 330C, 330C L, 330D L, 336D, 336E, 336E H, 345B, 345B II, 345B L, 345C...
1017269
TIP GP-LONG
385B, 390D, 994, 994D, 994F
385B, 390D, 994, 994D, 994F
1176809
TIP-PENETRATION
375 L, 385B, 390D, 994, 994D, 994F
375 L, 385B, 390D, 994, 994D, 994F
2296977
TIP GP-TWIN SHARP
320C, 320D, 320D L, 322C, 324D L, 324E L, 324E LN, 325C, 325D L, 329D L, 329E L, 329E LN, 330C L, 330D L, 336D L, 982M
320C, 320D, 320D L, 322C, 324D L, 324E L, 324E LN, 325C, 325D L, 329D L, 329E L, 329E LN, 330C L, 330D L, 336D L, 982M
2296964
TIP GP-EXTRA-DUTY
315C, 315D L, 318C, 319C, 319D, 319D LN, 320C, 320D, 320D LN, 320E LN, 320E LRR, 321D LCR, 322C, 323D L, 323D LN, 323D SA, 323E L, 324D L, 325C, 330C, 345C, 950G II, 950H, 950K, 962G II, 962H, 962K, 9...
315C, 315D L, 318C, 319C, 319D, 319D LN, 320C, 320D, 320D LN, 320E LN, 320E LRR, 321D LCR, 322C, 323D L, 323D LN, 323D SA, 323E L, 324D L, 325C, 330C, 345C, 950G II, 950H, 950K, 962G II, 962H, 962K, 9...
213B, 214B, 224B, 225, 225D, 227, 229, 229D, 231D, 245D, 318B, 318C, 320, 320 L, 320B, 320B FM LL, 320B L, 320B U, 320C, 320D, 320D L, 320D LRR, 320D RR, 320D2, 320E, 320E RR, 320N, 321B, 321D LCR, 32...
2320082
TIP-LEVELING EDGE
315C, 315D L, 318C, 319C, 320C, 323D L, 950G II, 950H, 962G II, 962H, M315C, M315D, M316C, M316D, M318C, M318D, M318D MH, M322C, M322D, M322D MH
315C, 315D L, 318C, 319C, 320C, 323D L, 950G II, 950H, 962G II, 962H, M315C, M315D, M316C, M316D, M318C, M318D, M318D MH, M322C, M322D, M322D MH