2K4569 TIP Caterpillar parts
977, 977D, 977H
Rating:
Alternative (cross code) number:
CA2K4569
2K-4569
2K4569
CA2K4569
2K-4569
2K4569
Weight: 5 pounds 2 kg.
RIPPER, TRACK LOADER,
Information:
Oils
Hot oil and hot components can cause personal injury. Do not allow hot oil to contact the skin. Also, do not allow hot components to contact the skin.Remove the hydraulic tank filler cap only after the engine has been stopped. The filler cap must be cool enough to touch with a bare hand. Follow the standard procedure in this manual in order to remove the hydraulic tank filler cap.Fire Prevention and Explosion Prevention
Illustration 8 g00704000
All fuels, most lubricants, and some coolant mixtures are flammable.Flammable fluids that are leaking or spilled onto hot surfaces or onto electrical components can cause a fire. Fire may cause personal injury and property damage. Remove all flammable materials such as fuel, oil, and debris from the machine. Do not allow any flammable materials to accumulate on the machine.Store fuels and lubricants in properly marked containers away from unauthorized persons. Store oily rags and any flammable materials in protective containers. Do not smoke in areas that are used for storing flammable materials.Do not operate the machine near any flame.Exhaust shields (if equipped) protect hot exhaust components from oil spray or fuel spray in case of a break in a line, in a hose, or in a seal. Exhaust shields must be installed correctly.Do not weld on lines or on tanks that contain flammable fluids. Do not flame cut lines or tanks that contain flammable fluid. Clean any such lines or tanks thoroughly with a nonflammable solvent prior to welding or flame cutting.Check all electrical wires daily. Repair any wires that are loose or frayed before you operate the machine. Clean all electrical connections and tighten all electrical connections.Dust that is generated from repairing nonmetallic hoods or nonmetallic fenders can be flammable and/or explosive. Repair such components in a well ventilated area away from open flames or sparks.Inspect all lines and hoses for wear or for deterioration. The hoses must be properly routed. The lines and the hoses must have adequate support and secure clamps. Tighten all connections to the recommended torque. Leaks can cause fires.
Illustration 9 g00704059
Use caution when you are refueling a machine. Do not
Hot oil and hot components can cause personal injury. Do not allow hot oil to contact the skin. Also, do not allow hot components to contact the skin.Remove the hydraulic tank filler cap only after the engine has been stopped. The filler cap must be cool enough to touch with a bare hand. Follow the standard procedure in this manual in order to remove the hydraulic tank filler cap.Fire Prevention and Explosion Prevention
Illustration 8 g00704000
All fuels, most lubricants, and some coolant mixtures are flammable.Flammable fluids that are leaking or spilled onto hot surfaces or onto electrical components can cause a fire. Fire may cause personal injury and property damage. Remove all flammable materials such as fuel, oil, and debris from the machine. Do not allow any flammable materials to accumulate on the machine.Store fuels and lubricants in properly marked containers away from unauthorized persons. Store oily rags and any flammable materials in protective containers. Do not smoke in areas that are used for storing flammable materials.Do not operate the machine near any flame.Exhaust shields (if equipped) protect hot exhaust components from oil spray or fuel spray in case of a break in a line, in a hose, or in a seal. Exhaust shields must be installed correctly.Do not weld on lines or on tanks that contain flammable fluids. Do not flame cut lines or tanks that contain flammable fluid. Clean any such lines or tanks thoroughly with a nonflammable solvent prior to welding or flame cutting.Check all electrical wires daily. Repair any wires that are loose or frayed before you operate the machine. Clean all electrical connections and tighten all electrical connections.Dust that is generated from repairing nonmetallic hoods or nonmetallic fenders can be flammable and/or explosive. Repair such components in a well ventilated area away from open flames or sparks.Inspect all lines and hoses for wear or for deterioration. The hoses must be properly routed. The lines and the hoses must have adequate support and secure clamps. Tighten all connections to the recommended torque. Leaks can cause fires.
Illustration 9 g00704059
Use caution when you are refueling a machine. Do not
Caterpillar parts catalog:
Parts tip Caterpillar catalog:
9J8920
TIP-RIPPER
16G, 227, 973, 977, D5B, D6D, D7G, D7H, E200B
16G, 227, 973, 977, D5B, D6D, D7G, D7H, E200B
7K0015
TIP
16, 977
16, 977
7K1519
TIP
977H
977H
7K0038
TIP
977
977
7B6060
TIP
977D
977D
4K0052
TIP
977, 977D, 977H
977, 977D, 977H
2M3649
TIP
977H
977H
4K6148
TIP
951, 977H, 977K, 980B, 988
951, 977H, 977K, 980B, 988
7B6060
TIP
977D
977D
2J1064
TIP
Caterpillar
Caterpillar
9W2452
TIP-RIPPER
320D, 320D GC, 320D L, 320D LRR, 320D RR, D8N, D8R, D8R II, D8T, D9N, D9R, D9T
320D, 320D GC, 320D L, 320D LRR, 320D RR, D8N, D8R, D8R II, D8T, D9N, D9R, D9T
9W2451
TIP-RIPPER
325, 325 LN, 330 L, D8L, D8N, D8R, D8R II, D8T, D9N, D9R, E240C, E300B, EL240B
325, 325 LN, 330 L, D8L, D8N, D8R, D8R II, D8T, D9N, D9R, E240C, E300B, EL240B
2J1189
TIP
Caterpillar
Caterpillar
1J5201
TIP
Caterpillar
Caterpillar
4K0051
TIP
955C, 955H
955C, 955H
4K0052
TIP
977, 977D, 977H
977, 977D, 977H
3J1782
TIP
8B, 9B
8B, 9B
2J2067
TIP (OPTIONAL)
Caterpillar
Caterpillar
3J1780
TIP (14.30" LONG)
Caterpillar
Caterpillar
2J1782
TIP (13.31" LONG)
Caterpillar
Caterpillar