TIP GP 3683867 - Caterpillar

Removal Procedure
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Drain the cooling system. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change" for more information.
Illustration 1 g01037065
Loosen clamp (2) and disconnect hose (1). Disconnect harness assemblies (3) .
Plug and cap all openings.
Illustration 2 g01037066
Remove nuts (4). Remove elbow assembly for exhaust (5) and the gasket.
Illustration 3 g01037069
Loosen clamps (8) and disconnect hoses (9). Remove nuts (7). Remove exhaust manifold (6) and the gasket.Installation Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     155-0695     Thread Lock Compound     1    
Illustration 4 g01037069
Position exhaust manifold (6) and the gasket. Apply Tooling (A) to nuts (7). Install nuts (7). Tighten nuts evenly to a torque of 14 N m (10 lb ft). Start at the center and move outward in order to tighten the nuts. Connect hoses (9) and tighten clamps (8) .
Illustration 5 g01037066
Position elbow assembly for exhaust (5) and the gasket. Install nuts (4) .
Illustration 6 g01037065
Connect harness assemblies (3). Connect hose (1) and tighten clamp (2) .
Fill the cooling system. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change".