TIP GP-ABRASION 3814096 - Caterpillar

Illustration 1 g00294870
Illustration 2 g00294871
Bolt tightening sequence
(1) Bolt Tighten the bolts for the aftercooler according to the following procedure:
Assemble the seals to the aftercooler core.
Temporarily secure the bottom seal to the aftercooler with tape. Do not use an adhesive, a silicone lubricant, or any other lubricant for retention of the seal.
Assemble the aftercooler with seals to the inlet manifold.
Inspect the bottom seal in order to ensure that the seal is seating correctly in the recess.
Install the aftercooler cover.
Inspect the upper seal in order to ensure that the seal is seating correctly in the recess.
Install the cover bolts. Hand tighten the cover bolts.
Tighten the bolts according to the numerical sequence. Torque ... 24 N m (18 lb ft)
Tighten the bolts again according to the numerical sequence. Torque ... 47 N m (35 lb ft)
Remove the tape. (2) Plug Apply 4C-5598 Anti-Seize Compound to the threads of the plug. Torque ... 25 5 N m (18 4 lb ft)