TIP GP-LONG 3G6127 - Caterpillar

Pilot Control (If Equipped)
Illustration 4 g03396943
OPEN BUCKET CLAM (1) - Move the switch to this position to open the bucket clam.HOLD (2) - Move the switch to this position to stop the movement of the bucket clam. The switch will return to the HOLD position when you release the switch from any position.
CLOSE BUCKET CLAM (3) - Move the switch to this position to close the bucket clam.Transmission Neutralizer Button
Illustration 5 g03693531
Mechanical Control (If Equipped)
Illustration 6 g03397149
Pilot Control (If Equipped)
Transmission Neutralizer Button - Push the button and hold the button when all available engine power is desired for the loader hydraulics. This will disengage the transmission from the driving wheels. Each momentary depression downshifts the transmission by one gear.Transmission Direction Control
Illustration 7 g03397141
Pilot Control (If Equipped)
Direction Selector
FORWARD - Move the transmission selector upward. The machine will move forward.
NEUTRAL - Move the transmission selector to the middle position for the NEUTRAL position. The machine should not move when the transmission lever is in NEUTRAL.
REVERSE - Move the transmission selector downward. The machine will move in reverse.Differential Lock Control
Illustration 8 g03693532
Mechanical Control (If Equipped)
Illustration 9 g03397145
Pilot Control (If Equipped)
Do not engage the differential lock if the machine is in third gear or above. Machine damage may occur.
Differential Lock - Push the button to engage the differential lock. The differential lock can prevent wheel slippage. Use the differential lock button when the machine is moving on soft ground or on wet ground. Apply the differential lock when the wheel is slipping. This will ensure positive engagement. Reduce the engine speed to the idle speed range before you engage the differential lock to minimize shock loads on the rear axle.Release the differential lock after engagement is noticed. The differential will automatically disengage when the torque allows the differential to disengage.Use the differential lock to prevent one wheel from slipping. If the wheels continue to slip in soft material, reduce the engine speed.When the differential lock is engaged, the differential is locked. Both rear wheels will turn at the same speed.Note: The differential lock will only function in the two-wheel steer mode if the machine is equipped with All Wheel Steer. The differential lock will become disabled when circle steer mode is selected or independent rear maneuvering is selected.