5054111 TIP AS-PEN Caterpillar parts
Rating:
Alternative (cross code) number:
CA5054111
505-4111
5054111
CA5054111
505-4111
5054111
Weight: 28 pounds 12 kg.
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
HASMX K1211-62230 PTO Switch Replaces for Kubota K1211-62231 K1211-32010 for John Deere AM118802 Fits for John Deere LX173 LX172 LX176 LX178 LX186 LX188 Tractors
HASMX This is a 10 Amp K1211-62230 PTO Switch for Kubota || Replaces Part Numbers: for Kubota K1211-62231 K1211-32010 for John Deere AM118802 || Compatible with Models: for John Deere LX173 LX172 LX176 LX178 LX186 LX188 Tractors || Number Of Positions: 2; Number Of Terminals: 5 || Package includes: 1 x 10 Amp K1211-62230 PTO Switch
HASMX This is a 10 Amp K1211-62230 PTO Switch for Kubota || Replaces Part Numbers: for Kubota K1211-62231 K1211-32010 for John Deere AM118802 || Compatible with Models: for John Deere LX173 LX172 LX176 LX178 LX186 LX188 Tractors || Number Of Positions: 2; Number Of Terminals: 5 || Package includes: 1 x 10 Amp K1211-62230 PTO Switch
HASMX K1211-62230 PTO Switch Replaces for Kubota K1211-62231 K1211-32010 for John Deere AM118802 Fits for John Deere LX173 LX172 LX176 LX178 LX186 LX188 Tractors
HASMX This is a 10 Amp K1211-62230 PTO Switch for Kubota || Replaces Part Numbers: for Kubota K1211-62231 K1211-32010 for John Deere AM118802 || Compatible with Models: for John Deere LX173 LX172 LX176 LX178 LX186 LX188 Tractors || Number Of Positions: 2; Number Of Terminals: 5 || Package includes: 1 x 10 Amp K1211-62230 PTO Switch
HASMX This is a 10 Amp K1211-62230 PTO Switch for Kubota || Replaces Part Numbers: for Kubota K1211-62231 K1211-32010 for John Deere AM118802 || Compatible with Models: for John Deere LX173 LX172 LX176 LX178 LX186 LX188 Tractors || Number Of Positions: 2; Number Of Terminals: 5 || Package includes: 1 x 10 Amp K1211-62230 PTO Switch
This part in 2 request:
Show.
This information for suppliers only!
2022-04-02
2021-05-25
For full view, you need register
Information:
Position Sensor (Auxiliary Hydraulic Control)
Illustration 1 g00785736
Auxiliary control for the auxiliary hydraulics
Illustration 2 g00777462
Location of the auxiliary controlThe auxiliary hydraulic control is the thumb buttons on the work tool control that can be pressed to the left and to the right. The auxiliary hydraulic control tells the auxiliary hydraulic ECM that the operator wants to activate the auxiliary hydraulics. The auxiliary hydraulic control will allow the operator to control the amount of hydraulic oil flow that is sent to the auxiliary hydraulics.The auxiliary hydraulic control sends a proportional signal to the auxiliary hydraulic ECM. The signal is a pulse width modulated signal (PWM) that is generated at a frequency between 400 Hz and 700 Hz. When the auxiliary hydraulic control is in the neutral position, a duty cycle of 50% 3% is seen by the ECM. When the auxiliary hydraulic control is pressed on the left or on the right, the duty cycle will vary from 50% to a minimum of 25% and from 50% to a maximum of 75%.The auxiliary hydraulic ECM receives the proportional signal on pin 53 of the ECM. The auxiliary hydraulic ECM will then send a proportional signal to the corresponding modulated valve (auxiliary)(A1 or A2).The auxiliary hydraulic ECM monitors the auxiliary control for duty cycles that are erratic, out of range or an abnormal frequency. A diagnostic code will then be set and the auxiliary hydraulics will not function.
Illustration 1 g00785736
Auxiliary control for the auxiliary hydraulics
Illustration 2 g00777462
Location of the auxiliary controlThe auxiliary hydraulic control is the thumb buttons on the work tool control that can be pressed to the left and to the right. The auxiliary hydraulic control tells the auxiliary hydraulic ECM that the operator wants to activate the auxiliary hydraulics. The auxiliary hydraulic control will allow the operator to control the amount of hydraulic oil flow that is sent to the auxiliary hydraulics.The auxiliary hydraulic control sends a proportional signal to the auxiliary hydraulic ECM. The signal is a pulse width modulated signal (PWM) that is generated at a frequency between 400 Hz and 700 Hz. When the auxiliary hydraulic control is in the neutral position, a duty cycle of 50% 3% is seen by the ECM. When the auxiliary hydraulic control is pressed on the left or on the right, the duty cycle will vary from 50% to a minimum of 25% and from 50% to a maximum of 75%.The auxiliary hydraulic ECM receives the proportional signal on pin 53 of the ECM. The auxiliary hydraulic ECM will then send a proportional signal to the corresponding modulated valve (auxiliary)(A1 or A2).The auxiliary hydraulic ECM monitors the auxiliary control for duty cycles that are erratic, out of range or an abnormal frequency. A diagnostic code will then be set and the auxiliary hydraulics will not function.
Caterpillar SIS machinery equipment:
Parts tip Caterpillar catalog:
5054110
TIP GP-WIDE
Caterpillar
Caterpillar
5054105
TIP AS-
Caterpillar
Caterpillar
5054104
TIP AS-SPIKE
Caterpillar
Caterpillar
5054102
TIP AS-
Caterpillar
Caterpillar
5054101
TIP AS-PEN
Caterpillar
Caterpillar
5054100
TIP AS-WIDE
Caterpillar
Caterpillar
5054192
TIP-HVY DUTY
Caterpillar
Caterpillar
5054191
TIP-HVY ABRS
Caterpillar
Caterpillar
5054121
TIP-
Caterpillar
Caterpillar
5054115
TIP AS-
Caterpillar
Caterpillar
5054114
TIP AS-SPIKE
Caterpillar
Caterpillar
5054112
TIP AS-
Caterpillar
Caterpillar