TIP KT 5727136 - Caterpillar

Illustration 1 g02916840
Table 1
Specification for 304-4908 Bucket Cylinder Gp    
Item     Qty     Part     Specification Description    
1     Bushing is one of the following part numbers:    
1 166-1679 Bushing     Bore diameter before assembly is
45.09 0.02 mm (1.775 0.001 inch).
Installation depth is
4.85 0.50 mm (0.191 0.020 inch).    
1 218-5194 Bushing     Bore diameter before assembly is
45.200 0.015 mm (1.7795 0.0006 inch).
Installation depth is
4.85 0.50 mm (0.191 0.020 inch).    
2     1     103-8331 Locknut     Before assembly, lubricate face and threads all around with 309-6932 Hydraulic Oil.
Torque to
1500 80 N m (1106 59 lb ft).    
3     1     099-7002 Ring     Lubricate inside diameter and outside diameter with clean grease.    
4     1     099-6998 Seal As     Lubricate inside diameter and outside diameter with clean grease.    
5     1     105-7252 Ring     Lubricate inside diameter and outside diameter with clean grease.    
A     1     235-7928 Cylinder As     Bore diameter is
80.080 0.030 mm (3.1528 0.0012 inch).    
B     1     235-7886 Rod As     Diameter is
54.93 0.03 mm (2.163 0.001 inch).    
6     1     114-0752 Bushing     Average out side diameter before assembly is
60.120 0.025 mm (2.3669 0.0010 inch).
Thickness is
2.480 0.020 mm (0.0976 0.0008 inch).    
7     1     133-6785 Buffer Seal     Lubricate the sealing lip lightly with the lubricant that is being sealed.    
8     1     099-6996 U-Cup Seal     Lubricate the sealing lip lightly with the lubricant that is being sealed.    
9     1     165-9280 Lip Type Seal     Lubricate the sealing lip lightly with the lubricant that is being sealed.    
10     -     -     Before assembly, apply green Loctite 609 to the wiper seal groove.    
11     Bushing is one of the following part numbers:    
1 242-3743 Bushing     Bore diameter before assembly is
55.19 0.04 mm (2.173 0.002 inch).
Installation depth is
5.00 0.50 mm (0.197 0.020 inch).    
1 218-5193 Bushing     Bore diameter before assembly is
55.200 0.025 mm (2.1732 0.0010 inch).
Installation depth is
5.00 0.50 mm (0.197 0.020 inch).    
12     1     099-7008 Ring     Before assembly, apply red Loctite 596 to the hole of the ring.    
C     1     099-7009 Head     Bore over two lands is
55.53 0.03 mm (2.186 0.001 inch).
Before drilling operation, tighten the head to
340 34 N m (251 25. lb ft).