TIP 5K0450 - Caterpillar

Improper lifting or tiedowns can allow load to shift and can cause injury and damage.
For the basic specifications of the machine, refer to the Operation and Maintenance Manual, "Specifications".
Illustration 1 g01046920
Lifting Point (1) - In order to lift the machine, attach the lifting devices to the lifting points.
Tie Down Point (2) - In order to tie down the machine, attach the tie-downs to the tie down points.
Do not tie down the machine over the operators platform. This will reduce the life of the drum and the platform isolation mounts.Do not tie down the mahcine over the steering hitch area. This will reduce the life of the steering articulation bearings.
Use properly rated cables and properly rated slings in order to lift the machine.Position the crane or the lifting device in order to lift the machine in a level position.The width of the spreader bar must be sufficient to prevent the lifting cables or the lifting straps from contacting the machine.
Attach lifting cables to the lifting eyes. The lifting eyes are identified on the machine by symbols.
In all cases, before tying down the machine, place wooden blocks under the front and rear frames. This will reduce the stress on the rubber isolation blocks.
Place blocks under the front and the rear frames.
Place blocks under the front and rear drums. Block tires.
In order to secure the machine, use tie-downs during transportation.Contact your Caterpillar dealer for shipping instructions.