TIP A-SPRAY 7W0748 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     183-4799     Lifting Bracket     1    
Illustration 1 g00645707
Use a hoist and Tool A in order to position the track roller under the track roller frame. The flat surface on the track roller shaft must be against the track roller frame.
Position two caps (1) on the track roller shaft. The lip of the caps must be facing away from the roller. Install four bolts (2) . Tighten the bolts to a torque of 750 80 N m (553.2 59.0 lb ft).
Lower the machine.
Adjust the track. Refer to Disassembly and Assembly, "Track - Connect" for the correct procedure to tighten the track.