9W8259 TIP-PENETRATION Caterpillar parts
307C, 308C, 311, 311B, 311C, 312B, 312C L, 312D, 314C, E110B, E120B, E200B, E240C, EL240B, M312, M315
Rating:
Alternative (cross code) number:
CA9W8259
9W-8259
9W8259
CA9W8259
9W-8259
9W8259
Weight: 4 pounds 1 kg.
EXCAVATOR, WHEELED EXCAVATOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
CTP 9W8259 Sharp Tip for Ground Engagement Tools, Center
CTP For Ground Engagement Tools || Tip Size J250 || Sold in each
CTP For Ground Engagement Tools || Tip Size J250 || Sold in each
$29.02
17 Jan 2024
Amazon.com
CTP 9W8259 Sharp Tip for Ground Engagement Tools, Center
CTP For Ground Engagement Tools || Tip Size J250 || Sold in each
CTP For Ground Engagement Tools || Tip Size J250 || Sold in each
$30.96
17 Jan 2024
US: FinditParts Inc
9W8259 - TIP PENETRATION fits Caterpillar (CAT)
BLUMAQ 9W8259 - TIP PENETRATION fits Caterpillar (CAT)
BLUMAQ 9W8259 - TIP PENETRATION fits Caterpillar (CAT)
Number on catalog scheme:
3
For full view, you need register
Compatible equipment models: 9W8259:
Information:
Engine: Machine with Mechanical Unit Injection
3126 Engine: Machine with Mechanical Unit Injection
3116 Engine: Machine with Mechanical Unit Injection
3114Warranty Category: GFeatures/Benefits
The reamer shims are used in order to control depth of the injector sleeve reaming operation. The reamer sleeves will allow only 0.25 mm (.010 inch) of material to be removed during each reaming. The reamer shims prevent the sleeve from being too deeply reamed. The shims provide a positive stop at the end of each reaming operation. The reamer shims minimize reamer chatter.Procedure
Install four shims between the 4C-8713 reamer shanks (2) and the bushing (3) .
The sleeve is reamed until the reamer shank contacts the shim.
Examine the injector sleeve after reaming.
If the injector sleeve is not clean, remove an additional shim.
Remove one shim (1) at a time.
Repeat the procedure until the proper seat finish is obtained. Specifications/Technical Information
Illustration 1 g00702594
(1) 170-9227 Reamer Shims (2) 4C-8713 Reamer Shank (3) 4C-8714 Bushing Thickness ... 0.25 mm (.010 inch)Number of shims per packet ... 4Reference
Refer to Tool Operating Manual, NEHS0675, "Using the 143-2099 Sleeve Replacement Tool Group ".
3126 Engine: Machine with Mechanical Unit Injection
3116 Engine: Machine with Mechanical Unit Injection
3114Warranty Category: GFeatures/Benefits
The reamer shims are used in order to control depth of the injector sleeve reaming operation. The reamer sleeves will allow only 0.25 mm (.010 inch) of material to be removed during each reaming. The reamer shims prevent the sleeve from being too deeply reamed. The shims provide a positive stop at the end of each reaming operation. The reamer shims minimize reamer chatter.Procedure
Install four shims between the 4C-8713 reamer shanks (2) and the bushing (3) .
The sleeve is reamed until the reamer shank contacts the shim.
Examine the injector sleeve after reaming.
If the injector sleeve is not clean, remove an additional shim.
Remove one shim (1) at a time.
Repeat the procedure until the proper seat finish is obtained. Specifications/Technical Information
Illustration 1 g00702594
(1) 170-9227 Reamer Shims (2) 4C-8713 Reamer Shank (3) 4C-8714 Bushing Thickness ... 0.25 mm (.010 inch)Number of shims per packet ... 4Reference
Refer to Tool Operating Manual, NEHS0675, "Using the 143-2099 Sleeve Replacement Tool Group ".
Caterpillar parts catalog:
Parts tip Caterpillar catalog:
215B, 312D, 312D L, 314C, 315, 315B L, 315C, 317, 317B LN, 320B, 320C, 321D LCR, 322, 322C, M312, M315, M318, M320
229, 235D, 311C, 312C L, 312D, 312D L, 313D, 313D2, 314C, 315C, 318B, 318C, 320 L, 320B, 320C, 321D LCR, 322B LN, 322C, 325, 325 L, 325 LN, 325B L, 330, 330B L, 330C, 615C, 950F, 950F II, 950G, 950G I...
205, 206, 212, 215, 215B, 312D, 312D L, 315C, 318B, 318C, 320 L, 320B, 320C, 321D LCR, 322B LN, 322C, 325, 325B L, 330, 330 FM L, 950B, 950F, 950G, 950G II, 950H, 962G, 962G II, 962H, E140, E200B, M31...
235B, 312D, 312D L, 315C, 320 L, 320B, 320C, 321D LCR, 322C, 325, 330, 330 FM L, E140, E200B, M312, M315, M318, M320
311, 311B, 311C, 312B, 312C L, 312D, 314C, 613C, 613C II, M312, M315
311C, 312C L, 312D, 312D2, 312D2 L, 312E L, 313D2, 314E LCR, 315C, 317B LN, 318C, 320C, 322B L, 322C, 325C
311C, 312C L, 320C, 320C FM
311C, 312C L, 312D, 314C, 314E LCR, 315C
312D, 312D L, 314C, 315C, 320 L, 320B, 320C, 321D LCR, 322C, 325, 330, 330 FM L, M320
205, 206, 212, 215, 320 L, E140, E200B
16G, 227, 973, 977, D5B, D6D, D7G, D7H, E200B
325, 325 LN, 330 L, D8L, D8N, D8R, D8R II, D8T, D9N, D9R, E240C, E300B, EL240B
9W8258
TIP-PENETRATION
307C, 308C, 311, 311B, 311C, 312B, 312C L, 312D, 314C, E110B, E120B, E200B, E240C, EL240B, M312, M315
307C, 308C, 311, 311B, 311C, 312B, 312C L, 312D, 314C, E110B, E120B, E200B, E240C, EL240B, M312, M315
311, 311B, 311C, 312B, 312C L, 312D, 314C, 613C, 613C II, M312, M315
235B, 312D, 312D L, 315C, 320 L, 320B, 320C, 321D LCR, 322C, 325, 330, 330 FM L, E140, E200B, M312, M315, M318, M320
235B, 312D, 312D L, 315C, 320 L, 320B, 320C, 321D LCR, 322C, 325, 330, 330 FM L, E140, E200B, M312, M315, M318, M320
205, 206, 212, 215, 215B, 312D, 312D L, 315C, 318B, 318C, 320 L, 320B, 320C, 321D LCR, 322B LN, 322C, 325, 325B L, 330, 330 FM L, 950B, 950F, 950G, 950G II, 950H, 962G, 962G II, 962H, E140, E200B, M31...
229, 235D, 311C, 312C L, 312D, 312D L, 313D, 313D2, 314C, 315C, 318B, 318C, 320 L, 320B, 320C, 321D LCR, 322B LN, 322C, 325, 325 L, 325 LN, 325B L, 330, 330B L, 330C, 615C, 950F, 950F II, 950G, 950G I...
311C, 312C L, 312D, 312D2, 312D2 L, 312E L, 313D2, 314E LCR, 315C, 317B LN, 318C, 320C, 322B L, 322C, 325C
1917206
TIP-LONG
301.5, 302.5
301.5, 302.5
227, 315C, 315D L, 318B, 318C, 318D L, 318D2 L, 320B, 320C, 320D, 320D GC, 320D L, 320D LRR, 320D RR, 321D LCR, 322, 322B L, 322B LN, 322C, 323D L, 324D, 324D L, 325, 325 L, 325 LN, 325B, 325B L, 325C...
1U2258
TIP-PENETRATION
312B L, 312C
312B L, 312C
1U2257
TIP-PENETRATION
312B L, 312C
312B L, 312C
205, 206, 212, 311, 311B, 312B, 815B, 825C, E110B, E120B, E200B, E240C, EL240B, M312, M315