TIRE A 0548260 - Caterpillar

1. Remove two bolts (2) and washers that hold throttle control pedal (1) to the operator's station. 2. Remove clip (not shown) and cable ties (3) from wiring harness (4).3. Disconnect throttle control pedal electrical connector (5).4. Remove the throttle control pedal. The following steps are for the installation of the throttle control pedal.5. Put throttle control pedal (1) in position as shown.6. Install two bolts (2) and washers that hold throttle control pedal (1) to the operator's station.7. Install clip (not shown) and cable ties (3) to wiring harness (4).8. Connect throttle control pedal electrical connector (5).End by:b. Remove steering frame lock pin.