TIRE 1274777 - Caterpillar

Illustration 1 g02796237
Table 1
Specification for 196-4120 Stick Cylinder Gp    
Item     Qty     Part     Specification Description    
1     2     087-5548 Bushing     Inside diameter is 100.29 0.02 mm (3.948 0.001 inch).    
Installation depth in the cap assembly
9.8 0.5 mm (0.39 0.02 inch).
Installation depth in the rod assembly
10.0 0.5 mm (0.39 0.02 inch).
2     1     7Y-4695 Locknut     Before assembly, lubricate the face and the threads with 309-6932 Hydraulic Oil .    
Torque to
10800 550 N m (7966 406 lb ft).
3     1     7Y-4697 Ring     Lubricate the inside diameter and the outside diameter with clean grease.    
4     1     9X-3601 Seal As     Lubricate the inside diameter and the outside diameter with clean grease.    
5     1     096-1581 Ring     Lubricate the inside diameter and the outside diameter with clean grease.    
A     1     196-4121 Cylinder As     Bore diameter is
150.00 0.10 mm (5.906 0.004 inch).    
B     1     196-4124 Rod As     Diameter is
104.930 0.038 mm (4.1311 0.0015 inch).    
C     1     358-8524 Head     Bore over two lands is
105.63 0.03 mm (4.159 0.001 inch).    
6     8     7Y-5215 Bolt     Torque to
900 100 N m (664 74 lb ft).    
7     1     103-8380 Stop     Free linear movement of the stop after assembly is
0.50 0.26 mm (0.020 0.010 inch).    
8     2     095-0929 Retaining Ring     Maximum outside diameter after assembly is
70.4 mm (2.77 inch).    
9     1     5I-8516 Seal Ring     The slit of the seal ring must turn in the direction of the piston.    
10     1     114-0760 Bushing     Outside diameter before assembly is
110.148 0.033 mm (4.3365 0.0013 inch).    
Thickness is
2.475 0.025 mm (0.0974 0.0010 inch).
11     1     128-9265 Buffer Seal     Lubricate the sealing lightly with the lubricant that is being sealed.    
12     1     170-9864 U-Cup Seal     Lubricate the sealing lightly with the lubricant that is being sealed.    
13     1     165-9290 Lip Type Seal     Lubricate the sealing lightly with the lubricant that is being sealed.    
14     -     -     Before assembly, apply green Loctite Retaining Compound 620 to the wiper seal groove.