TIRE GP 1368661 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 439-3940 Bracket As 1 Start By:
Release the hydraulic system pressure.
Drain the hydraulic oil. Refer to Operation and Maintenance Manual, "Hydraulic Oil - Change" for the correct draining and filling procedure.
Illustration 1 g01218778
Remove bolts (1) and reposition filter assembly (2).
Illustration 2 g01218865
Disconnect hose assemblies (4). Remove bolts (3). Reposition filter assembly (5) out of the way.
Illustration 3 g01223795
Remove bolts (6) from pipe assembly (7).
Illustration 4 g01218952
Illustration 5 g01218954
Attach Tooling (A) and a suitable lifting device to oil filter assembly (9). The weight of oil filter assembly (9) is approximately 20 kg (45 lb). Remove bolts (8). Disconnect harness assembly (11). Remove bolts (10). Remove oil filter assembly (9). Installation Procedure
Install oil filter assembly (9) in the reverse order of removal.
Tighten bolts (6) to a torque of 50 10 N m (37 7 lb ft).