TIRE AS. 2197641 - Caterpillar

Illustration 1 g03143567
Bolt tightening sequence
Table 1
Specification for 339-3585 Cylinder Head Gp and 396-8374 Cylinder Head As    
Item     Qty     Part     Specification Description    
1     24     106-1792 Taperlock Stud     Torque to 35 5 N m (26 4 lb ft).    
-     16     124-1855 Bolt     Use
194 mm (7.6 inch) length for the following bolts:
Bolt 1 through bolt 10, bolt 15, bolt 17, bolt 19, bolt 21, bolt 23, and bolt 25.    
-     10     124-1854 Bolt     Use
216 mm (8.5 inch) length for the following bolts:
Bolt 11 through bolt 14, bolt 16, bolt 18, bolt 20, bolt 22, bolt 24, and bolt 26.    
-     13     248-0036 Bolt     Use
149.9 mm (5.90 inch) length for the bolt 27 through bolt 39.    
-     -     -     Use the following procedure in order to tighten the cylinder head bolts:
Refer Illustration 1 for bolt tightening sequence.
Before assembly, apply black 4C-5592 Anti-Seize Compound to the bolt threads and to both sides of the washers for bolt 1 through bolt 26.
1. Tighten bolt 1 through bolt 26 in a numerical sequence to
270 15 N m (199 11 lb ft).
2. Tighten bolt 1 through bolt 26 in a numerical sequence to
450 15 N m (332 11 lb ft).
3. Again, tighten bolt 1 through bolt 26 in a numerical sequence to
450 15 N m (332 11 lb ft).
4. Tighten bolt 27 through bolt 39 in a numerical sequence to
45 7 N m (33 5 lb ft).    
Illustration 2 g03143574
Table 2
Item     Qty     Part     Specification Description    
2     29     3B-0623 Cup Plug     Before assembly, apply High Strength or High Temperature Anaerobic Flange Sealant to the surface.    
3     2     3B-0645 Cup Plug     Before assembly, apply High Strength or High Temperature Anaerobic Flange Sealant to the surface.    
4     12     263-4920 Injector Sleeve     Before assembly, apply green Loctite 620 to the surface.
Press the injector sleeve to the bottom of the face (5) .    
6     1     3B-0645 Cup Plug     Before assembly, apply High Strength or High Temperature Anaerobic Flange Sealant to the surface.
Installation depth (H) is
1.25 0.25 mm (0.049 0.010 inch).    
7     7     3B-0623 Cup Plug     Before assembly, apply High Strength or High Temperature Anaerobic Flange Sealant to the surface.
Installation depth (H) is
1.25 0.25 mm (0.049 0.010 inch).    
8     -     -     Before assembly, apply High Strength or High Temperature Anaerobic Flange Sealant to the cup plug surface.
Installation depth of the cup plug is
1.25 0.25 mm (0.049 0.010 inch).    
Illustration 3 g03143570
Table 3
Item     Qty     Part     Specification Description    
Install the 216-5582 Bushing in the cylinder head to the following distance    
-     -