TIRE-RADIAL 2927097 - Caterpillar

Illustration 1 g01189667
Illustration 2 g01189525
Use Tooling (D) in order to install retaining ring (26) .
Install washer (27) .
Raise the temperature of bearing (24) .
Install bearing (24) .
Install washer (28) .
Use Tooling (D) in order to install retaining ring (29) .
Illustration 3 g01189523
Install bearing (24) and shaft (25) .
Install O-ring seal (23) .
Illustration 4 g01189522
Install lip seal (22) .
Illustration 5 g01189521
Install cover (20) .
Use Tooling (E) in order to install retaining ring (19) .
Use Tooling (D) in order to install retaining ring (21) .
Illustration 6 g01189519
Install washers (12) and spring (13) .
Illustration 7 g01189518
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Use a suitable press, Tooling (B), and Tooling (C) in order to install retaining ring (11) into barrel assembly (9) .
Illustration 8 g01189517
Install twelve pins (10) .
Illustration 9 g01189686
Install bearing (18) .
Illustration 10 g01189688
Install retainer (17) and pistons (16) .
Illustration 11 g01189689
Install barrel assembly (9), plates (14), discs (15), and O-ring seals (8) .
Illustration 12 g01189513
Install piston (6) .
Install springs (7) .
Illustration 13 g01189512
Install bearing (5), port plate (4), and the O-ring seal.
Illustration 14 g01189510
Install head assembly (1) and bolts (2). Tighten bolts (2) to a torque of 627 94 N m (463 69 lb ft).
Install check valves (3). Tighten check valves (3) to a torque 176 10 N m (130 7 lb ft).End By: Install the swing motor. Refer to Disassembly and Assembly, "Swing Motor - Install".