TIRE & RIM AR 3583084 - Caterpillar

AFFECTED PRODUCT
Model Identification Number
797B JSM00152
797F LAJ00142-00146, 151-153, 155, 157, 183-184, 188-194, 197-214
PARTS NEEDED
Qty
Part Number Description
1 6V1819 BOLT
2 6V5839 WASHER-HARD
8 8T0643 BOLT
8 8T9405 BOLT-SOCKET HEAD
8 0966166 WASHER-HARD
1 1904885 SPACER
1 3160487 SPACER
1 3610850 BRACKET AS
1 3653163 HARNESS AS
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 32% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer.
ACTION REQUIRED
1. Remove braided harness, ECM, upper ECM mounting bracket, atmospheric pressure sensor, and vent from the front of the engine. Retain the ECM, mounting hardware, sensor, and vent for re-assembly.
2. Install the new upper ECM mounting bracket in place of the old. Re-use the hardware removed in Step 1.
3. Install the atmospheric pressure sensor and vent onto the new ECM mounting bracket.
4. Install the ECM onto the new ECM mounting bracket. Re-use the hardware removed in Step 1.
5. Install the ECM harness onto the new ECM mounting bracket using the spacers, bolts, and washers listed in Parts Needed. Connect the harness to the ECM.
6. Turn the Key Switch to the ON position, verify no electrical diagnostic codes are present.
Image1
Image2
SERVICE CLAIM ALLOWANCES
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
0-6000 hrs,
0-60 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
This is a 2.0-hour job
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.