TIRE & RIM GP 3702047 - Caterpillar

When opening or closing the windows, be extra careful to prevent any personal injury. The hydraulic lockout control must be in the LOCKED position in order to prevent any possibility of sudden movement of the machine due to inadvertent contact with the hydraulic control(s).
Do not change the position of the window until the following items have been done:
Park the machine on a level surface.
Lower the work tool to the ground.
Move the hydraulic lockout control to the LOCKED position.
Stop the engine.Perform Step 1 through Step 4 in order to open the upper window.
Illustration 1 g02866496
Release both latches (1) on the sides of the front window in order to release the front window.
Hold both grips (2) that are provided on the front window frame. Move the front window upward into the STOWED position until the auto-lock latch is engaged. Perform the steps that follow in order to close the upper window.
Use latches (1) in order to unlock the front window when the front window is in the STOWED position.
Securely hold grips (2), and slowly pull the front window downward until the front window locks in the DOWN position.
Perform Steps 6 through 8 in order to open the lower window and close the lower window.
Illustration 2 g02866577
Raise the lower window out of the window frame.
Illustration 3 g02866596
Store the lower window in the holder that is located in the rear of the cab. To store the lower window, locate one side of the lower window into bracket (4). Secure the opposite side of the lower window with catch (5).
To close the lower window, reverse the procedure that is used for opening the lower window. Note: The lower window is curved. The lower window can only be positioned one way in the holders.