TIRE & RIM GP 5088653 - Caterpillar

Illustration 1 g03344797
Table 1
Specification for 384-4520 Water Pump Gp
Item Qty Part Specification Description
1 1 9M-3786 O-Ring Seal Lubricate the bore lightly with 5P-3975 Rubber Lubricant.
2 1 0S-1591 Bolt Torque to 39 3 N m (29 2 lb ft).
3 1 349-2654 Water Pump Seal With an installation tool, press the water pump seal onto the water pump shaft until the stationary cup is fully seated in the pump housing.
4 1 153-1256 Lip Type Seal By using an installation tool, install the lip type seal with the primary lip toward water pump drive gear. Press the lip type seal until the lip type seal is flush with the face inside the housing. Use press to install the lip the seal, do not install the lip type seal by hand.
A 1 135-4928 Water Pump Shaft Diameter of the water pump shaft at the carbon seal assembly seat area is 19.100 0.010 mm (0.7520 0.0004 inch).