TIRE 9R1882 - Caterpillar

Illustration 1 g03505432
Front view
Typical example
Table 1
Specification for 321-2051 Bucket Linkage Gp, 321-2136 Bucket Linkage Gp, and 330-2599 Bucket Linkage Gp
Item Qty Part Specification Description
- Assemble the linkage on the machine by rotating the rod end of the bucket cylinder and by positioning the grease fitting away from the stick. All bores must be free of paint. Coat all the bores for pins with 5P-0960 Grease Cartridge.
1 1 441-0041 Pin As Diameter is 129.850 0.040 mm (5.1122 0.0016 inch).
2 2 7Y-9915 Bushing Bore before assembly is 130.32 0.02 mm (5.131 0.001 inch).
Installation depth is 9.65 0.80 mm (0.380 0.031 inch).
3 4 9X-4600 Lip Type Seal Lubricate the sealing lip lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces the outside, as shown. Install the lip type seals so that the lip type seals do not extend beyond the face of the boss.
4 2 9X-4599 Lip Type Seal Lubricate the sealing lip lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces the outside, as shown. Install the lip type seals so that the lip type seals do not extend beyond the face of the boss.
5 1 441-0038 Pin As Diameter is 119.85 0.04 mm (4.718 0.002 inch).
6 2 198-5529 Bushing Bore before assembly is 120.320 0.020 mm (4.7370 0.0008 inch).
Installation depth is 9.5 0.8 mm (0.37 0.03 inch).
7 1 212-2896 Pin As Diameter is 99.85 0.04 mm (3.931 0.002 inch).
8 1 - Diameter is 129.850 0.040 mm (5.1122 0.0016 inch).