TOOL GP- 1432099 - Caterpillar

Removal Procedure
Start By:
Turn the battery disconnect switch to the OFF Position.
Illustration 1 g03823099
Disconnect harness assembly for temperature sensor (1).
Remove the temperature sensor from Selective Catalytic Reduction (SCR) assembly (2). Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Bostik Pure Nickel
Anti-Seize Compound 1 Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Ensure that all components are clean and free from wear and damage. If necessary, replace any components that are worn or damaged.
Illustration 2 g03823099
Apply Tooling (A) to the threads of temperature sensor (1).
Install the temperature sensor to Selective Catalytic Reduction (SCR) assembly (2). Tighten the temperature sensor to a torque of 45 N m (33 lb ft). End By:
Turn the battery disconnect switch to the ON Position.