TOOL G-LIFTER 1P5600 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     1U-8846     Gasket Sealant     1    
Drain the engine oil into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Engine Oil and Filter - Change".
Illustration 1 g01308759
Remove covers (1) .
Illustration 2 g01308777
Remove bolts (4) and (5). Remove oil pan (3) and gasket (2) .
Illustration 3 g01308778
Remove screws (7). Remove frame (8) and gasket (6) .Installation Procedure
Illustration 4 g01215533
Apply Tooling (A) to positions (Y) .
Illustration 5 g01308778
Install gasket (6) and frame (8). Tighten screws (7) to a torque of 22 N m (16 lb ft).
Illustration 6 g01308777
Illustration 7 g01308806
Install gasket (2) and oil pan (3). Tighten bolts (5) and (4) to a torque of 22 N m (16 lb ft). Tighten bolts (5) and (4) in the sequence that is shown in Illustration 7.
Illustration 8 g01308759
Install covers (1) .
Fill the engine oil. Refer to Operation and Maintenance Manual, " Engine Oil and Filter - Change".