TOOL KT- 2286560 - Caterpillar

(1) Torque for nut ... 14 4 N m (10 3 lb ft)(2) Height above mounting plate to assemble center line of control lever pivot ... 34 1 mm (1.34 .04 in)(3) Torque for nut ... 8 5 N m (6 4 lb ft)(4) Installation torque for switch ... 18.5 1.5 N m (13.7 1.1 lb ft)Use 2Y5671 Washers as needed so that when the control lever is in the engaged position, the switch plunger is depressed approximately ... 3 mm (.120 in) Switch is used only when vehicle is equipped with Monitor Group.(5) Torque for 4 nuts ... 25 7 N m (18 5 lb ft)(6) Torque for 3 nuts ... 38 2 N m (28 1 lb ft)(7) Initial cable installation dimension ... 17.5 mm (.69 in)Adjust this dimension as necessary so that lever travel is centered in slot.(8) Distance cable is to be threaded into ends ... 10 1 mm (.40 .04 in)