TOOL-SCARIFIER 3861148 - Caterpillar

Illustration 1 g01134843
Illustration 2 g01134847
Illustration 3 g01134858
(1) Inside diameter of the bearing Diameter after assembly ... 31.811 0.013 mm (1.2524 0.0005 inch) Maximum roughness average (Ra) ... 0.8 micrometer (32 microinch)Note: If the inside diameter of the bearing is not correct, the bearing must be machined or replaced with another bearing. (2) The bearings are installed in the cover at the following depth. ... 1.5 0.5 mm (0.06 0.02 inch) (3) The bearings are installed in the body at the following depth. ... 1.5 0.5 mm (0.06 0.02 inch) (4) The location of each bearing junction is shown. Position the bearing junctions from the centerline through the bearing bores to the following angle. ... 45 15 degrees