TOOL-CHISEL 3991711 - Caterpillar

3991711 TOOL-CHISEL Caterpillar parts H75E S

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA3991711
399-1711
3991711

Weight: 54 pounds 24 kg.

Buy TOOL-CHISEL 3991711 Caterpillar genuine, new aftermarket tractor parts with delivery
HAMMER,

Show more prices Caterpillar parts

Compatible equipment models: 3991711:

HAMMER H75E S Caterpillar

Number on catalog scheme:

Caterpillar 3991711 Parts scheme TOOL-CHISEL

For full view, you need register

Information:

Disassembly Procedure
Start By:
Remove the rocker shaft and the pushrods. Refer to Disassembly and Assembly, "Rocker Shaft and Pushrod - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00842949
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
In order to remove rocker arms (1), rocker arms (2), washers (3), and springs (4) slide rocker shaft (7) from the end of base (9) .Note: Place an identification mark on each of the components for installation.
Remove adjusting screws (6) and nut (5) from rocker arms (1) and rocker arms (2) .
Inspect all of the components from base (9) for wear or for damage. If any of the components are worn or damaged, use new parts for replacement.
Inspect O-ring seal (8) for wear or for damage. If the O-ring seal is worn or damaged, use a new part for replacement.