TOOL-MOIL POINT 4238334 - Caterpillar

4238334 TOOL-MOIL POINT Caterpillar parts H35E S

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA4238334
423-8334
4238334

Weight: 8 pounds 3 kg.

Buy TOOL-MOIL POINT 4238334 Caterpillar genuine, new aftermarket tractor parts with delivery
HAMMER,

Compatible equipment models: 4238334:

HAMMER H35E S Caterpillar

Number on catalog scheme: 2

Caterpillar 4238334 Parts scheme TOOL-MOIL POINT

For full view, you need register

Information:

Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g06321483
Illustration 2 g06321454
Ensure that the seat for fuel injector (2) in the cylinder head and fuel injector (2) is clean and free from damage.
On installing original fuel injector (2), install a new O-ring seal (6) and a new sealing washer (7) to fuel injector (2).On installing a new fuel injector, ensure that O-ring seal (6) and sealing washer (7) are not damaged and are in place.Note: Do not lubricate the O-ring seal.
Position clamp (5) onto fuel injector (2). Install fuel injector (2) into the cylinder head.Note: Ensure that alignment Pin (8) is located opposite to clamp (5).
Install bolt (4) finger tight.
Tighten bolt (4) to a torque of 27 N m (239 lb in).
Remove caps from fuel injector (2).
Connect hose assembly (1) and hose (3) to fuel injector (2).
If necessary, repeat Step 1 through Step 7 to install the remaining fuel injector.End By:
Install the fuel injection lines.