TOOL-INSTALLER 4383244 - Caterpillar

(1) Tighten compressor shaft nut to a torque of ... 70 7 N m (50 5 lb. ft.) If the cotter pin can not be installed, tighten nut more to make an alignment of the nearest slot in the nut with the hole in the shaft.(2) Put 5P3413 Pipe Sealant on the threads of the studs and bolts at assembly.(3) Put clean engine oil or glycerin on the O-ring seal at assembly.(4) V-Belt. Tighten the V-Belt to the specifications given in the V-BELT TENSION CHART.9N5563 Air Compressor Group.
(1) Tighten nut to a torque of ... 110 15 N m (80 11 lb. ft.) Lightly hit with a hammer and tighten again to a torque of ... 110 15 N m (80 11 lb. ft.)(2) Put clean engine oil or glycerin on the O-ring seals at assembly.