TOOL GP 4641955 - Caterpillar

Illustration 1 g01303445
Illustration 2 g01303450
Illustration 3 g01303442
Attach Tooling (B), Tooling (C), and Tooling (D) to transmission (23). The weight of transmission (23) is approximately 450 kg (992 lb).
Use Tooling (B), Tooling (C), and Tooling (D) to lift transmission (23) into position. Connect transmission (23) to the rear case.
Illustration 4 g01303448
Install nuts (24) that secure transmission (23).
Remove Tooling (B), Tooling (C), and Tooling (D).
Illustration 5 g06268708
Typical example
Illustration 6 g01303440
Use Tooling (A) to raise the rear of the machine. Remove suitable cribbing (22) and lower the machine onto the ground.
Place the blade into the FLOAT position.
Illustration 7 g01303339
Illustration 8 g01303375
Install tube assembly (20). Install bolts (19) and (21).
Illustration 9 g01303262
Move linkage assembly (17) into position. Install bolts (18). Connect yoke (15).
Illustration 10 g01303261
Connect linkages (14) and (15) to the left rear side of the transmission.
Illustration 11 g01303260
Place harness assembly (12) into position and install cable straps (13). Connect harness assembly (11). Install clamp (10).
Illustration 12 g01303258
Position hose assemblies (9) and install clips (8). Position block assembly (7) and install bolts (6).
Illustration 13 g01303256
Illustration 14 g01303257
Install tube assembly (4) and transmission magnetic screen (2) as a unit. Install bolts (5) and connect tube assembly (4).
Illustration 15 g01303255
Connect hose assembly (1) from the transmission magnetic screen (2). Install clip (3).
Fill the transmission with oil. Refer to Operation and Maintenance Manual, "Transmission Oil - Change". End By:
Install the lubrication relief valve for the transmission.
Install the torque converter outlet relief valve.
Install the torque converter inlet relief valve.
Install the universal joint.
Install the flywheel scavenge pump.