TOOL-MOIL 4688017 - Caterpillar

Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-0510 Driver Gp 1
Illustration 1 g00985215
Use Tooling (A) in order to install bearings (16) in body assembly (14). Install the bearings with the separation 30 15 degrees from the center of dowels (17). Install the bearings to a depth of 1.500 0.25 mm (0.0590 0.010 inch) below the surface of the body assembly. The inside diameter of the bearings must be 31.7850 0.008 mm (1.25140 0.0003 inch) after installation.
Install dowels (17) until the dowels (17) extend 50.00 0.5 mm (0.200 0.02 inch) above the surface of the body assembly.
Install O-ring seals (15).
Illustration 2 g00985213
Install shaft assemblies (13) in body assembly (14).
Illustration 3 g00985211
Install the key and gears (12) on the shaft assemblies.
Illustration 4 g00985208
Install body (9) and O-ring seals (10) and (11).
Illustration 5 g00985206
Use Tooling (A) in order to install bearings (8) in body assembly (6). Install the bearings. Install the bearings with the separation 30 15 degrees from the center of dowels. Install the bearings to a depth of 1.500 0.25 mm (0.0590 0.010 inch) below the surface of the body assembly. The inside diameter of the bearings must be 31.7850 0.008 mm (1.25140 0.0003 inch) after installation.
Install O-ring seal (7).
Illustration 6 g00985205
Install body assembly (6).
Illustration 7 g00985204
Install the key and gears (5) on the shaft assemblies.
Illustration 8 g00985203
Use Tooling (A) in order to install bearings (4) in cover assembly (2). Install the bearings with the separation 30 15 degrees from the dowels. Install the bearings to a depth of 1.500 0.25 mm (0.0590 0.010 inch) below the surface of the cover assembly. The inside diameter of the bearings must be 31.7850 0.008 mm (1.25140 0.0003 inch) after installation.
Install O-ring seal (3).
Illustration 9 g00985200
Install cover assembly (2) and bolts (1). The pump must turn freely after assembly. Lubricate the pump with the oil before running the pump. End By:
Install the power train oil pump. Refer to Disassembly and Assembly, "Power Train Oil Pump - Install" for the machine that is being serviced.