TOOL GP-STUD TENSIONER 4C5850 - Caterpillar

4C5850 TOOL GP-STUD TENSIONER Caterpillar parts 3606, 3608, 3612, 3616, G3606, G3608, G3612, G3616

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA4C5850
4C-5850
4C5850

Caterpillar 4C5850 TOOL GP-STUD TENSIONER

Weight: 392 pounds 177 kg.

Buy TOOL GP-STUD TENSIONER 4C5850 Caterpillar genuine, new aftermarket tractor parts with delivery
GAS ENGINE, MARINE ENGINE,

Compatible equipment models: 4C5850:

GAS ENGINE G3606 G3608 G3612 G3616

MARINE ENGINE 3606 3608 3612 3616 Caterpillar

For full view, you need register

Information:

Illustration 127 g00531730
Remove ten cup plugs (202) from ring gear assembly (201) .
Illustration 128 g00531732
Remove five friction discs (203) and four clutch plates (204) from the clutch housing.
Illustration 129 g00531733
Install Tooling (G) to clutch housing (205) . Attach Tooling (G) to a suitable lifting device and a hoist.
Use Tooling (G) to remove clutch housing (205) , the clutch piston, and the cage as a unit. The weight of clutch housing (205) , the clutch piston, and the cage as a unit is 73 kg (160 lb).
Illustration 130 g00531736
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Loosen ten bolts (206) evenly. Loosen each of the bolts by one revolution before proceeding to the next bolt until the spring pressure has been released. Remove ten bolts (206) and the washers.
Remove balance piston (207) from clutch housing (206) .
Illustration 131 g00531778
Remove seal ring (208) from balance piston (207) .
Illustration 132 g00531780
Remove 18 springs (209) from clutch piston (210) .
Illustration 133 g00531781
Use two screwdrivers (not shown) to remove clutch piston (210) from clutch housing (205) .
Illustration 134 g00531782
Remove seal ring (211) from clutch piston (210) .
Illustration 135 g00531783
Position clutch housing (205) on two wood blocks, as shown. Note: Put identification marks on the position of the cage for installation purposes.
Use a suitable drift to remove cage (212) (not shown) from clutch housing (205) . The weight of clutch housing (205) is 36 kg (79 lb).
Illustration 136 g00531786
Remove metal seal ring (213) and six O-ring seals (214) .
Remove roller bearing race (215) from cage (212) .
Illustration 137 g00531787
Remove seal ring (216) and race bearing (217) from clutch housing (205) .
Illustration 138 g00531788
Remove two bolts (218) and the washers in order to remove tube assembly (219) from the transfer gear assembly.
Illustration 139 g00531790
Remove two O-ring seals (220) from tube assembly (219) .