TOOL 5002093 - Caterpillar

Illustration 1 g02983917
Table 1
Specification for 478-3088 Boom    
Item     Qty     Part     Specification description    
All bores must be free of paint. Use 5P-0960 Grease Cartridge to coat all bores for the pins, the stick, the upper frame, the bushing, and the cylinder pin bores.    
1     1     4I-4809 Pin As     Diameter is
79.850 0.025 mm (3.1437 0.0010 inch).    
2     1     176-2278 Pin     Diameter is
79.850 0.025 mm (3.1437 0.0010 inch).    
3     2     166-1495 Lip Type Seal     Lubricate the sealing lip of the lip type seals lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces outside, as shown. Install the lip type seals so that the lip type seals do not extend beyond the face of the boss.    
4     2     357-5709 Bushing     Bore before assembly is
90.345 0.030 mm (3.5569 0.0012 inch).    
Installation depth is
9.5 0.8 mm (0.37 0.03 inch).
5     As required, use the following shims in order to adjust the maximum lateral clearance to
1.6 mm (0.06 inch). Mount the steel shim in order to be located at the boom side.    
2 093-0084 Shim     Thickness of one shim is
1.0 mm (0.04 inch).    
1 113-2127 Shim     Thickness of one shim is
0.5 mm (0.02 inch).    
6     1     346-7276 Pin As     Diameter is
89.850 0.025 mm (3.5374 0.0010 inch).