TOOL- 5169340 - Caterpillar

List Of Tools Necessary For Minor Repairs And Maintenance Of Units Of All Sizes
1 Circlip pliers Ø 2 to 2,5 mm1 Screw driver 3 mm1 Screw driver 6 mm1 Screw driver 9 mm1 Plastic hammer - small1 Pointed pliers (can also be slightly bent)1 Torque key to 14,9 Nm*1 Set of ring spanners 5/16 to 11/41 Set of Allenkeys 1/4 to 3/81 Fixed spanner 15/16 for high pressure relief valve1 Puller retainer sealOrder-number for set of tool, complete*: 605 014Additional Tools List For Complete Stripping Of Units
(Major repairs should not be carried out during the warranty period)1 Right angle screw driver 16 mm1 Set of drifts 2 to 10 mm1 Plastic hammer - large1 Bearing puller 80 x 120 mm1 Bearing puller 200 x 250 mm1 Each fixed spanner for servo cylinder 36, 41, 46, 50, 55, 60, 65 mm1 Depth gauge 300 mm1 Set of fixed or open ended spanners 7/16 to 11/41 Fitting block - see page 18Order-number for set of tool, complete*: 605 022Measuring Instruments
At last 2 pressure gauges up to 60 bar damped (charge pressure - servo pressure)1 Vacuum gauge to +1,0 ÷ -1,0 bar (vacuum measurement at the charge pump)2 Pressure gauges to 600 bar (high pressure measurement at the valve block)1 Pressure gauge to 8 bar (casing pressure measurement)Order-number for set of measuring instruments: 576 421*Additional Torque spanners, separate order!Trouble Shooting, Gauge Installation And Information