TOOL 5331166 - Caterpillar

Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Brackets 2 Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
Illustration 1 g01336825
Illustration 2 g01338086
Attach Tooling (A) and a suitable lifting device to fuel tank (16). The weight of fuel tank (16) is approximately 125 kg (275 lb). Position fuel tank (16). Install bolts (15).
Illustration 3 g01338073
Connect hoses (14).
Illustration 4 g01338075
Position filter assembly (12). Position bracket (11) and install the bolts. Connect hose assembly (10). Install clips (13).
Illustration 5 g01338071
Connect harness assembly (9).
Illustration 6 g01338070
Position handrail (7) and install bolts (8).
Illustration 7 g01338069
Install panel (6).
Illustration 8 g01338068
Install bolt (5).
Illustration 9 g01337886
Install the storage box and bolts (4).
Illustration 10 g01337885
Install bolts (3). Close door (2).
Illustration 11 g01338063
Install panel (1).
Fill the fuel tank . Refer to Operation and Maintenance Manual, "Refill Capacities".