TOOL-MOIL 5661535 - Caterpillar

Improper calibration of the Front Control System could result in unexpected machine motion which could result in serious injury or death. Select the correct bucket that is equipped from the bucket list on the monitor for the Front Control System Operation. See Operation and Maintenance Manual, "Monitoring System" for more information to ensure proper calibration of the Front Control System.
Note: The stopping distance of the bucket tip may not be consistent. The stopping distance depends on operator input through the joystick or hydraulic oil temperature.The linkage arm height limit can be set in the monitoring system under the E-ceiling function. The E-ceiling function will cause the front linkage operation to slow down. The front linkage will stop at the set height.Note: The E-ceiling function restricts the boom-stick-bucket operation. The set height of the machine can be changed. This depends on the position of the machine. The line for the set height is not flat when the machine is on a slope. The set height line will follow the slope of the machine.
Illustration 2 g01548263
(A) E-ceiling line
(B) E-ceiling height
(C) Base line
Illustration 3 g01548264
(A) E-ceiling line
(B) E-ceiling height
(C) Base line
(D) Horizontal line Height Limit Set Point
Improper calibration of the Front Control System could result in unexpected machine motion which could result in serious injury or death. Select the correct bucket that is equipped from the bucket list on the monitor for the Front Control System Operation. See Operation and Maintenance Manual, "Monitoring System" for more information to ensure proper calibration of the Front Control System.
The height limit can be set by the current position of the front linkage. Move the front linkage to the desired height. The highest point of the front linkage will be used for the height limit set point.Use the following procedure