TOOL GP 5691698 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Magnets 8 Start By:
Remove the rocker shaft and pushrods.
Remove the front housing.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g02720888
Ensure that Timing Marks (Y) on the idler gear and the camshaft gear are aligned. Refer to illustration 1.
Illustration 2 g02721408
Use a magnet to hold up the lifters in order to remove the camshaft.
Illustration 3 g02721410
Do not damage the lobes or the bearings when the camshaft is removed or installed.
Remove bolts (2) and the washers.
Carefully remove camshaft (1) from the cylinder block. Installation Procedure
Install camshaft (1) in the reverse order of removal.
Apply engine oil to threads and torque bolts (2) to 24 to 27 N m (18.0 to 20.0 lb ft).