TOOL G. 5S6093 - Caterpillar

Removal Procedure
Start By:
Remove the flywheel housing. Refer to Disassembly and Assembly, "Flywheel Housing - Remove and Install".
Remove the engine oil pump. Refer to Disassembly and Assembly, "Engine Oil Pump - Remove".
Remove the front housing. Refer to Disassembly and Assembly, "Housing (Front) - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01028042
Illustration 2 g01184978
Remove main bearing caps (2).
Remove connecting rod caps (3).
Put identification marks on the gear train for installation purposes. Attach a suitable lifting device to each end of crankshaft (1). Carefully remove crankshaft (1) from the cylinder block. The weight of crankshaft (1) is approximately 60 kg (132 lb).