TOOL G. 9S2575 - Caterpillar

Illustration 2 g06128688
Section C-C
Table 2
Item Qty Part Specification Description
18 1 214-2445 Spring Length under test force is 40 mm (1.6 inch).
Test force is 940 100 N (211 22 lb).
Free length after test is 43.04 mm (1.694 inch).
19 1 7Y-4224 Orifice Do not apply sealant.
Torque to 10 2 N m (89 18 lb in).
20 1 267-3741 Actuator Before assembly, lightly lubricate the sliding and rolling surfaces with hydraulic oil.
21 1 322-2018 Actuator Slide Before assembly, lightly lubricate the sliding and rolling surfaces with hydraulic oil.
22 1 158-3504 Control Spool Before assembly, lightly lubricate the sliding and rolling surfaces with hydraulic oil.
23 4 162-2165 Bolt Torque to 2.20 0.25 N m (19.47 2.21 lb in).
24 1 198-2914 Nut Torque to 20 3 N m (177 27 lb in).
25 1 316-1438 Cartridge As Torque to 35 3 N m (26 2 lb ft).
26 1 270-7898 Spring Length under test force is 46.95 mm (1.848 inch).
Test force is 27.22 0.63 N (6.12 0.14 lb).
Free length after test is 57.22 mm (2.253 inch).
27 1 6J-2680 O-Ring Seal Lubricate lightly with lubricant that is being sealed.
28 1 177-1405 Spring Length under test force is 8.20 mm (0.323 inch).
Test force is 18.41 0.55 N (4.14 0.12 lb).
Free length after test is 12.29 mm (0.484 inch).
Illustration 3 g06128695
187-9116 Pump Barrel As
Table 3
Item Qty Part Specification Description
29 9 120-7508 Bushing All bearing surfaces must be kept clean.
Bore before assembly is 30.20 0.08 mm (1.191 0.003 inch).
Illustration 4 g06128699
316-1438 Cartridge As
Table 4
Item Qty Part Specification Description
30 - - Torque to 20 3 N m (177 27 lb in).
31 - - Torque to 35 3 N m (26 2 lb ft).