TOOL GP- 9U7305 - Caterpillar

Body Hoist Control
Body must be lowered and in the FLOAT position when operating the machine.
Raise (1.) - Pull the lever up and hold it in the UP position, to raise the body and empty the load. Release the lever and it will return to HOLD.
Hold (2.) - The body will not move.
Float (3.) - Push the lever down to the FLOAT position. The body will seek its own level. The lever will stay in this position until manually moved.
Lower (4.) - Push the lever down to lower the body. Release the lever and it will return to FLOAT.
Do not move the hoist control to the LOWER position when the body retaining cable is installed between the dump body and the rear tow pin. When the hoist control is in the LOWER position, hydraulic force may cause the body retaining cable to fail with the potential for injury or death.