TOOTH 1K5407 - Caterpillar

Illustration 1 g01516670 (1) 103-5348 Sleeve Bearing Inside diameter ... 100.29 0.02 mm (3.948 0.001 inch)Outside diameter ... 116.230 0.013 mm (4.5760 0.0005 inch)Installation depth of the sleeve bearing ... 14.9 0.5 mm (0.59 0.02 inch)Note: Lubricate the threads of the locknut (2) with 248-7522 Hydraulic Oil all around before assembly. (2) Torque for the locknut ... 10000 500 N m (7380 370 lb ft) (3) Lubricate the inside diameter and the outside diameter of the ring with clean grease. (A) Bore of the cylinder assembly ... 170.00 0.10 mm (6.693 0.004 inch) (B) Diameter of the rod ... 109.930 0.038 mm (4.3279 0.0015 inch) (C) Bore of the head over two lands ... 110.63 0.03 mm (4.356 0.001 inch) (4) 105-2659 Sleeve Bearing Inside diameter ... 110.300 0.020 mm (4.3425 0.0008 inch)Outside diameter ... 130.240 0.013 mm (5.1275 0.0005 inch)Installation depth of the sleeve bearing ... 10.0 0.5 mm (0.39 0.02 inch) (5) The slit of the seal ring must turn in the direction of the piston. (6) Lubricate the sealing lip of the buffer seal lightly with the lubricant that is being sealed. (7) Lubricate the sealing lip of the U-cup seal lightly with the lubricant that is being sealed. (8) Lubricate the sealing lip of the lip type seal lightly with the lubricant that is being sealed. (9) Apply 4C-9506 Retaining Compound to the wiper seal groove before assembly.