TOOTH-UNI 1U1567 - Caterpillar

1U1567 TOOTH-UNI Caterpillar parts 966D, 977L

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA1U1567
1U-1567
1U1567

Weight: 52 pounds 23 kg.

Buy TOOTH-UNI 1U1567 Caterpillar genuine, new aftermarket tractor parts with delivery
TRACK LOADER, WHEEL LOADER,

Compatible equipment models: 1U1567:

TRACK LOADER 977L

WHEEL LOADER 966D Caterpillar

Number on catalog scheme: 5

Caterpillar 1U1567 Parts scheme TOOTH-UNI

For full view, you need register

1U1567 Images:

Information:

(1)Radiator
Always inspect cooling system with engine stopped.Remove filler cap slowly to relieve pressure. Steam can cause personal injury.Inhibitor contains alkali, avoid contact with skin and eyes to prevent personal injury.
1. Measure with engine stopped. Remove radiator cap slowly to relieve pressure.2. Maintain coolant level to within 1/2 inch (1 cm) of bottom of fill pipe.3. Inspect filler cap gasket and replace if damaged.(2)Engine Crankcase
Measure oil level with engine stopped. Maintain oil level at FULL mark on gauge.(3)Precleaner
1. Inspect visually. Cup should be emptied whenever dirt reaches indicator mark. Loosen wing nut on top of cap and remove cap and cup. 2. Empty cup. Install cup and cap. Peridoically wash entire precleaner in water.(4)Fuel Tank
Open fuel tank drain valve and allow water and sediment to drain. Close valve.(5)Water Separator-If Equipped
Observe water separator. Drain any water before starting engine.Anytime water separator becomes one-half full, stop the engine and drain separator.
If element becomes contaminated enough that water cannot be seen through transparent cover, install new element. See WATER SEPARATOR under "WHEN REQUIRED". Close fuel supply valve. Open drain valve (A) and vent valve (B). Drain water. Close both valves. Open fuel supply valve.