3199615 TOOTH Caterpillar parts
PR190
Rating:
Alternative (cross code) number:
CA3199615
319-9615
3199615
CA3199615
319-9615
3199615
Weight: 0.19 pounds 0 kg.
RAKE-POWER BOX,
This part in 2 request:
Show.
This information for suppliers only!
2023-05-15
2023-05-15
Compatible equipment models: 3199615:
Number on catalog scheme:
For full view, you need register
Information:
Removal Procedure
Start By:
Remove the rocker shaft and the pushrods. Refer to Disassembly and Assembly, "Rocker Shaft and Pushrod - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Note: For information on reusability of components of the lifter group, refer to Guideline For Reusable Parts And Salvage Operations, SEBF8264, "Camshaft Roller Followers Used in 3114 and 3116 Engines" and Guideline For Reusable Parts And Salvage Operations, SEBF8067, "Slipper Followers and Camshaft Roller Followers".
Illustration 1 g00747310
Remove bolts (1) from cover (2).
Carefully remove cover (2) and the gasket. Note: It may be necessary to remove the governor in order to remove the cover at the front of the engine.
Illustration 2 g00629677
Remove bolts (4), lifter shaft (5), and lifters (3) from cover (2). Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: For information on reusability of components of the lifter group, refer to Guideline For Reusable Parts And Salvage Operations, SEBF8264, "Camshaft Roller Followers Used in 3114 and 3116 Engines" and Guideline For Reusable Parts And Salvage Operations, SEBF8067, "Slipper Followers and Camshaft Roller Followers".
Illustration 3 g00629677
Position lifters (3) and lifter shaft (5) on cover (2). Install bolts (4).
Illustration 4 g00747310
Position the gasket and cover (2) on the engine.
Install bolts (1) in cover (2). End By:
Install the rocker shaft and the pushrods. Refer to Disassembly and Assembly, "Rocker Shaft and Pushrod - Install".
Start By:
Remove the rocker shaft and the pushrods. Refer to Disassembly and Assembly, "Rocker Shaft and Pushrod - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Note: For information on reusability of components of the lifter group, refer to Guideline For Reusable Parts And Salvage Operations, SEBF8264, "Camshaft Roller Followers Used in 3114 and 3116 Engines" and Guideline For Reusable Parts And Salvage Operations, SEBF8067, "Slipper Followers and Camshaft Roller Followers".
Illustration 1 g00747310
Remove bolts (1) from cover (2).
Carefully remove cover (2) and the gasket. Note: It may be necessary to remove the governor in order to remove the cover at the front of the engine.
Illustration 2 g00629677
Remove bolts (4), lifter shaft (5), and lifters (3) from cover (2). Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: For information on reusability of components of the lifter group, refer to Guideline For Reusable Parts And Salvage Operations, SEBF8264, "Camshaft Roller Followers Used in 3114 and 3116 Engines" and Guideline For Reusable Parts And Salvage Operations, SEBF8067, "Slipper Followers and Camshaft Roller Followers".
Illustration 3 g00629677
Position lifters (3) and lifter shaft (5) on cover (2). Install bolts (4).
Illustration 4 g00747310
Position the gasket and cover (2) on the engine.
Install bolts (1) in cover (2). End By:
Install the rocker shaft and the pushrods. Refer to Disassembly and Assembly, "Rocker Shaft and Pushrod - Install".
Caterpillar parts catalog:
Parts tooth Caterpillar catalog:
2475914
TOOTH AS-CUTTER
HM312, HM315
HM312, HM315
2475913
TOOTH AS-CUTTER
HM312, HM315
HM312, HM315
3713698
TOOTH
A26B, A7B
A26B, A7B
3713697
TOOTH
A26B, A7B
A26B, A7B
3713693
TOOTH
A26B, A7B
A26B, A7B
3713692
TOOTH
A26B, A7B
A26B, A7B
3472496
TOOTH AS
MP15, VT30
MP15, VT30
3472510
TOOTH AS
MP15, VT30
MP15, VT30
3472511
TOOTH AS
MP15, VT30
MP15, VT30
3131305
TOOTH
MP15, MP318, P215, P360, VHC-30, VHP-30, VT30
MP15, MP318, P215, P360, VHC-30, VHP-30, VT30
3131306
TOOTH
MP15, P360, VHC-30, VT30
MP15, P360, VHC-30, VT30
3913716
TOOTH AS-RIPPER
MP15, MP318, P215, P360, VHC-30, VHP-30, VT30
MP15, MP318, P215, P360, VHC-30, VHP-30, VT30