TOOTH GP-RIPPER 6Y6140 - Caterpillar

Illustration 15 g01069523
Pack roller bearing (27) (not shown) with Tooling (B). Use Tooling (A) in order to install roller bearing (27) (not shown) into pulley (18) .
Illustration 16 g01069522
Use Tooling (A) to install lip seal (26). Install seal (26) with the lip of the seal towards the outside of pulley (18) .
Illustration 17 g01069521
Install space (25) to pulley (18) .
Illustration 18 g01069520
Install retaining ring (24) to pulley (18) .
Illustration 19 g01069519
Install spacer (23) to pulley (18) .
Illustration 20 g01069518
Install bearing (22) to pulley (18).
Install pulley (18) onto arm assembly (9) .
Illustration 21 g01069517
Install bolt (20) and two washers (21) that secure pulley (18) to arm assembly (9) .
Illustration 22 g01069516
Position cover (19) to pulley (18). Install four bolts (17) that secure cover (19) to pulley (18) .
Illustration 23 g01069515
Install shaft assembly (11) onto arm assembly (9) .
Illustration 24 g01069514
Install bolt (15) and washer (16) that secures arm assembly (9) to shaft assembly (11) .
Illustration 25 g01061696
Install retainer (14) to shock absorber (8).
Install the pin and install cotter pin (13) .
Illustration 26 g01061695
Install shock absorber (8) to the engine.
Install locknut (7) that secures shock absorber (8) to the engine.
Install shaft assembly (11). Install four bolts (12) that secure shaft assembly (11).
Install nut (10) that secures arm assembly (9) .
Illustration 27 g01115178
Release the tension and install three V-belts belts (6) .
Illustration 28 g01115159
Install guard (3), bolts (1), (2), (4) and (5) .End By:
Install the engine bottom guards. Refer to Disassembly and Assembly, "Bottom Guard (Engine) - Remove and Install".
Separate the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".