TORQUE CONVERTER GP 1T1917 - Caterpillar

Illustration 1 g01616154
Table 1
Specification for 8N-7706 Oil Pan Gp
Item Qty Part Specification Description
- 15 1A-2029 Bolt Use the following procedure in order to tighten the bolts of the plate:
1. Tighten five bolts (11) to standard torque.
2. Tighten bolt 1 through bolt 10 in a numerical sequence that is shown in Illustration 1 to a standard torque.
12 - - As required, apply 8T-9014 Silicone Sealant, Permatex No. 2 or 138-8436 Liquid Gasket to the joints of the gasket prior to assembly.
13 - - Lubricate the bore of nine O-ring seals lightly with the lubricant that is being sealed or an approved equivalent.
14 - - As required, apply 8T-9014 Silicone Sealant, Permatex No. 2 or 138-8436 Liquid Gasket on Connecting joint of the flywheel housing (17) and the rear of the cylinder block, and Connecting joint of the front accessory drive housing (18) and the front of the cylinder block prior to assembly.
15 38 5P-5855 Bolt As required, apply 4C-9509 Wicking Sealant to the open top end of the bolt holes after assembly of the oil pan.
16 1 142-4159 Integral Seal As required, apply 8T-9014 Silicone Sealant, Permatex No. 2 or 138-8436 Liquid Gasket to the sealing surface of the integral seal prior to assembly.
19 1 4B-2363 Oil Drain Plug Torque to 145 15 N m (105 11 lb ft).
20 1 6I-0723 Oil Drain Plug Torque to 55 7 N m (41 5 lb ft).