TORQUE CONVERTER GP 1T1920 - Caterpillar

1T1920 TORQUE CONVERTER GP Caterpillar parts 578, 583R, D8N, D8R

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA1T1920
1T-1920
1T1920

Weight: 26 pounds 11 kg.

Buy TORQUE CONVERTER GP 1T1920 Caterpillar genuine, new aftermarket tractor parts with delivery
PIPELAYER, TRACK-TYPE TRACTOR,

This part in 1 request: Show. This information for suppliers only!

#515471 1t-1920

2020-08-25

Compatible equipment models: 1T1920:

PIPELAYER 578 583R

TRACK-TYPE TRACTOR D8N D8R Caterpillar

Number on catalog scheme: 1

Caterpillar 1T1920 Parts scheme TORQUE CONVERTER GP

For full view, you need register

Information:

Illustration 1 g01406610
View of typical work tool control group from the forward end
Illustration 2 g01406617
View of typical work tool control group from the rear end
Table 1
Linkage Pins
Item Pin Diameter Pin Length Part Number for the Pin
1 76.175 0.025 mm (2.9990 0.0010 inch)
190.0 2.0 mm (7.48 0.08 inch) 235-7386 Pin
3
76.175 0.025 mm (2.9990 0.0010 inch)
194.0 2.0 mm (7.63 0.08 inch) 146-8011 Pin
5
76.175 0.025 mm (2.9990 0.0010 inch)
500.0 2.0 mm (19.68 0.08 inch) 146-8015 Pin
10
88.875 0.025 mm (3.4990 0.0010 inch)
225.0 2.0 mm (8.85 0.08 inch) 235-7387 Pin
11
88.875 0.025 mm (3.4990 0.0010 inch)
750.0 2.0 mm (29.52 0.08 inch) 146-8002 Pin
13
101.56 0.04 mm (3.998 0.002 inch)
585.0 2.0 mm (23.03 0.08 inch) 146-7991 Pin
14
76.175 0.025 mm (2.9990 0.0010 inch)
164.0 2.0 mm (6.45 0.08 inch) 235-7388 Pin
16
88.875 0.025 mm (3.4990 0.0010 inch)
225.0 2.0 mm (8.85 0.08 inch) 235-7399 Pin
18
76.175 0.025 mm (2.9990 0.0010 inch)
248.0 2.0 mm (9.76 0.08 inch) 235-7389 Pin
Table 2
Linkage Bearings
Item Installed Bearing Diameter Depth at Assembly Part Number for the Bearing
2
76.37 0.06 mm (3.007 0.002 inch)
9.5 2.0 mm (0.37 0.08 inch) 4V-8674 Sleeve Bearing
4
76.37 0.06 mm (3.007 0.002 inch)
10.0 2.0 mm (0.39 0.08 inch) 4V-8639 Sleeve Bearing
6
70.01 0.05 mm (2.756 0.002 inch)
10.0 2.0 mm (0.39 0.08 inch) 4T-0370 Sleeve Bearing
7
89.07 0.06 mm (3.507 0.002 inch)
10.0 2.0 mm (0.39 0.08 inch) 4V-4453 Sleeve Bearing
12
101.77 0.06 mm (4.007 0.002 inch)
10.0 2.0 mm (0.39 0.08 inch) 4V-2879 Sleeve Bearing
15
89.07 0.06 mm (3.507 0.002 inch)
18.0 2.0 mm (0.70 0.08 inch) 1V-8242 Sleeve Bearing
17
89.07 0.06 mm (3.507 0.002 inch)
10.0 2.0 mm (0.39 0.08 inch) 3V-2333 Sleeve Bearing (8) As required, use the 194-7111 Shims , and the 194-7112 Shims in order to reduce the gap to less than 1.0 mm (0.04 inch) between the lift arms and the frame assembly. Center the lift arms into the frame